Arch Kujera, Kujera Marar Baya by Edvard Glazebrook

Arch Kujera, Kujera Marar Baya by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 Kyautar A' Design Award ta Tagulla in Ƙirar Kayan Ɗaki Competition Category.

TagullaKayan Ɗaki· 2021

Arch Kujera, Kujera Marar Baya

by Edvard Glazebrook

Kyautar A' Design Award ta Tagulla Winner in Kayan Ɗaki Category

11,029

Verified Award Winner

Verify Award Status for #106853

View at A' Design Award Press Release Award Badge

Colors

The Design

About Arch Kujera, Kujera Marar Baya

Arch kujera ce da kuma zama marar baya wanda aka yi da itacen pine mai laminate wanda aka sassaka kuma aka bushe da baƙar fenti. Ƙirar tana dogaro ne akan sifofi da salailai masu sauƙi da maimaituwa, wanda ke ba kayan daki bayyanuwa mai kama da juna kuma mai ma'ana. Baka guda biyar iri ɗaya suna samar da ƙafafun kujera da bayanta, yayin da zama marar baya aka yi shi da rabin-baka guda uku waɗanda suke haɗuwa a tsakiya. Ana yanke dukkan sassan daga faranti na itace mai laminate ta amfani da na'urar CNC router, sannan a manne su kuma a haɗa su da sandunan itace. Lanƙwasan suna ƙarfafa kayan dakin a wuraren da suke da rauni.

The Recognition

About the Kyautar A' Design Award ta Tagulla

Zanen Arch Kujera, Kujera Marar Baya ya lashe Kyautar A' Design Award ta Tagulla, wata karramawa mai tsananin daraja da ake bai wa zane-zane na musamman waɗanda ke da ƙirƙira, basira da hikima. Waɗanda suka lashe kyautar Tagulla kayayyakin fasaha ne masu ƙwarewa da ƙirƙira mai ban mamaki waɗanda ke tabbatar da babban gogewa, tunani da dabarun masu zanensu. Ana sa ran zanen Arch Kujera, Kujera Marar Baya ya zama abu da ake girmamawa sosai, ake sha'awa da ƙauna, mai ƙwarewa da ƙirƙire-ƙirƙire. Wannan zane da ya lashe Kyautar A' Design Award ta Tagulla yana haɗa mafi kyawun ayyuka a fasaha, kimiyya, zane da fasahar zamani, kuma yana da kyau saboda kulawarsa ga cikakkun bayanai. Zanen Arch Kujera, Kujera Marar Baya yana biyan buƙatu da kyau, yana taɓa sha'awa, yana jan hankalin zukata kuma yana jawo sha'awar sani.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensions & Packaging: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tags: Wood, Chair, Stool, Pine wood, Arches, Curve
Production Technology: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Design Challenge: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Research: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiration: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Project Duration: The project started in march 2020 - and finished in late May 2020.
Operation Flow: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patents: Copyrights belong to Edvard Glazebrook, 2020
Team Members: Edvard Glazebrook