Arch Noho, Noho ʻAʻohe Kua na Edvard Glazebrook

ʻO Arch Noho, Noho ʻAʻohe Kua na Edvard Glazebrook he mea lanakila hanohano loa o ka 2021 A' Design Award Keleawe ma ka Māhele Hoʻokūkū Hoʻolālā Lako Hale.

KeleaweLako Hale· 2021

Arch Noho, Noho ʻAʻohe Kua

na Edvard Glazebrook

Mea Lanakila A' Design Award Keleawe ma ka Māhele Lako Hale

11,029

Mea Lanakila i Hōʻoia ʻIa

Hōʻoia i ke Kūlana Makana no #106853

Nānā ma A' Design Award Hoʻolaha Nūhou Hōʻailona Makana

Nā Waihoʻoluʻu

Ka Hoʻolālā

E Pili Ana iā Arch Noho, Noho ʻAʻohe Kua

ʻO Arch he noho a me kahi noho ʻaʻohe kua i hana ʻia mai ka lāʻau paina laminated i kālai ʻia a hoʻoluʻu ʻeleʻele ʻia. Hoʻokumu ʻia ke kālai hoʻolālā ma luna o nā ʻano a me nā kiʻi maʻalahi a hana hou pinepine ʻia, e hāʻawi ana i ka noho hoʻonohonoho like a maʻalahi ke ʻike ʻia. ʻElima arch like ke ʻano e hana ana i nā wāwae a me ke kua o ka noho, a ʻo ka noho ʻaʻohe kua i hana ʻia mai ʻekolu hapalua arch e hui pū ana ma waena. Ua ʻoki ʻia nā ʻāpana a pau mai kahi papa lāʻau laminated me kahi mīkini CNC router, a laila hoʻopili ʻia a hui pū ʻia me nā pahu lāʻau. Hoʻoikaika nā piko pio i ka noho ma kona mau wahi nāwaliwali loa.

Ka Hoʻomaikai

E Pili Ana i ka A' Design Award Keleawe

Ua lanakila ka hoʻolālā Arch Noho, Noho ʻAʻohe Kua i ka A' Design Award Keleawe, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kūʻokoʻa i ʻike ʻia ma o ka hana noʻeau, ka akamai a me ka makakoho. He mau hana mākaukau a hana noʻeau kupaianaha nā lanakila Keleawe e hōʻoia ana i ka ʻike nui, ka noʻonoʻo a me ka maʻalea o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Arch Noho, Noho ʻAʻohe Kua he mea i mahalo nui ʻia, hoʻohiwahiwa ʻia a aloha ʻia, he ʻoihana a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Keleawe e hoʻohui ana i nā hana maikaʻi loa o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana, a maikaʻi no kona nānā ʻana i nā kikoʻī. Hoʻokō maikaʻi ka hoʻolālā Arch Noho, Noho ʻAʻohe Kua i nā pono, hoʻopā i ka makemake, hoʻohiwahiwa i nā manaʻo a huki i ka makemake e ʻike.

Ma Hope o ka Hoʻolālā

ʻEke Nūhou

Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.

Nā ʻAno Kūʻokoʻa: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Nā Ana a me ka Hoʻopili: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Nā Lepili: Wood, Chair, Stool, Pine wood, Arches, Curve
ʻEnehana Hana: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Pilikia Hoʻolālā: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Noiʻi: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Hoʻoulu Manaʻo: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Ka Lōʻihi o ka Papahana: The project started in march 2020 - and finished in late May 2020.
Kaʻina Hana: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Nā Palapala Kuleana: Copyrights belong to Edvard Glazebrook, 2020
Nā Lālā Hui: Edvard Glazebrook