ʻO Cubus Noho Lima na Eckhard Beger he mea lanakila hanohano loa o ka 2021 A' Design Award Keleawe ma ka Māhele Hoʻokūkū Hoʻolālā Lako Hale.

KeleaweLako Hale· 2021

Cubus Noho Lima

na Eckhard Beger

Mea Kūʻai: ArteNemus

Mea Lanakila A' Design Award Keleawe ma ka Māhele Lako Hale

16,713

Mea Lanakila i Hōʻoia ʻIa

Hōʻoia i ke Kūlana Makana no #113662

Nānā ma A' Design Award Hoʻolaha Nūhou Hōʻailona Makana

Nā Waihoʻoluʻu

Ka Hoʻolālā

E Pili Ana iā Cubus Noho Lima

He noho lima ʻo Cubus me kona keʻehana wāwae kūlike i hoʻolālāʻia no nā keʻena hou. Hoʻokumuʻia ke ʻano ma luna o kahi pahu kui i hoʻohaʻahaʻaʻia, kahi i hoʻopili ʻia ai kekahi pahu kui pololei ʻelua i loko, a naʻe ke pahu kui i loko i hōʻike i ke kūlana noho. ʻO ka hopena, he noho ʻoluʻolu e kau ana ma luna o kahi kumu ʻike ʻole i ke kūpaʻa. Hana ʻia ke ʻano kūkulu me ka lāʻau me nā kapuaʻi kila, a hoʻopau ʻia me ka lacquer kala ʻano like ʻole a i ʻole me ka lau kālā. Hana ʻia nā pihapiha me ka ʻili a i ʻole ka lole me kahi loko puna hana lima, e ʻae ana i nā hui kala he nui. Hiki nō hoʻi ke hoʻohana wale ʻia ke keʻehana wāwae ma kona kaʻawale.

Ka Hoʻomaikai

E Pili Ana i ka A' Design Award Keleawe

Ua lanakila ka hoʻolālā Cubus Noho Lima i ka A' Design Award Keleawe, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kūʻokoʻa i ʻike ʻia ma o ka hana noʻeau, ka akamai a me ka makakoho. He mau hana mākaukau a hana noʻeau kupaianaha nā lanakila Keleawe e hōʻoia ana i ka ʻike nui, ka noʻonoʻo a me ka maʻalea o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Cubus Noho Lima he mea i mahalo nui ʻia, hoʻohiwahiwa ʻia a aloha ʻia, he ʻoihana a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Keleawe e hoʻohui ana i nā hana maikaʻi loa o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana, a maikaʻi no kona nānā ʻana i nā kikoʻī. Hoʻokō maikaʻi ka hoʻolālā Cubus Noho Lima i nā pono, hoʻopā i ka makemake, hoʻohiwahiwa i nā manaʻo a huki i ka makemake e ʻike.

Ma Hope o ka Hoʻolālā

ʻEke Nūhou

Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.

Nā ʻAno Kūʻokoʻa: The Cubus armchair is based on a tilted cube in which a second straight cube is nested, which is defining the seating position. The result is a comfortable seating position resting on an apparently unstable base. The structure is made from wood and can be either lacquered or covered in silver leaf. The cushions, which are designed for maximum comfort, are made from leather or fabric with a wide variety of possible color combinations.
Nā Ana a me ka Hoʻopili: Dimensions of the Armchair
height: 860mm
width 900mm
Depth: 700mm
Seat height: 420mm
The non tilted basic cube has the following dimensions:
Width: 760mm
Height: 680mm
Depth 700mm

Dimensions of the footstool
Height: 400mm
Width: 580mm
Depth: 400mm
Nā Lepili: Eckhard Beger, ArteNemus, Cubus, Armchair, chair, design chair, contemporary chair, footstool
ʻEnehana Hana: With regard to the construction and manufacturing of the structure, different approaches were assessed: welded aluminum sheet metal, riveted aluminum sheet metal, traditional wood structure. The traditional wood structure was finally chosen for simplicity and cost reasons while the feet are made form steel.

The structure can be finished with colored lacquer or with silver leaf.
The cushions are made from leather or fabric with a synthetic foam interior.
Pilikia Hoʻolālā: The design challenge of this project resided in ensuring the maximum seating space within the structure while keeping its outer dimensions minimal and at the same time maintaining structural integrity of the asymmetric design.
Noiʻi: While its lines are minimalistic, the Cubus armchair lends itself to a big variety of color combinations.
The analytic research part of the project concentrated on assessing these color, finish and material combinations. Two distinct sets of color clusters materialized for two different potential customer categories. For a majority of female respondents, the combination of a silver structure with contemporary purple, turquoise and light pink was favoured. Fabric, velvet and leather were the favoured materials for the cushions. For a majority of business or male respondents unicolour black, midnight blue or white colour were favoured.
Hoʻoulu Manaʻo: The cubic outline of the armchair is inspired by minimalist creations from the Bauhaus period such as the F51 by W. Gropius. The tilted appearance of the cubic structure is a contemporaneous design element lending the piece aesthetic tension.

This armchair and the footstool are the first pieces of a furniture interior also composed of a stool, a sofa and a side table.
Ka Lōʻihi o ka Papahana: The project started in June 2020 in Geneva Switzerland and will finish in Geneva during the 1st. quarter 2021.
Kaʻina Hana: Cubus is a contemporary reinterpretation of the classical armchair with a footstool. The emotional interaction with the user however is different as the asymmetric design of Cubus raises interest about the sitting experience. The conception of the cushions is such that the comfort is similar to a classic armchair with a symmetric concept. The footstool can also be used on its own. The people who were presented with the design asked when and where they could see and try out the armchair.
Nā Palapala Kuleana: Copyrights belong to Eckhard Beger
Nā Kuleana Kiʻi: #1: Eckhard Beger / Designer
#2: Eckhard Beger / Designer
#3: Eckhard Beger / Designer
#4: Eckhard Beger / Designer
#5: Eckhard Beger / Designer