ʻO Dond Papa ʻaʻa Haʻahaʻa na Jinyang Koo he mea lanakila hanohano loa o ka 2020 A' Design Award Keleawe ma ka Māhele Hoʻokūkū Hoʻolālā Lako Hale.

KeleaweLako Hale· 2020

Dond Papa ʻaʻa Haʻahaʻa

na Jinyang Koo

Mea Kūʻai: Wuui

Mea Lanakila A' Design Award Keleawe ma ka Māhele Lako Hale

17,687

Mea Lanakila i Hōʻoia ʻIa

Hōʻoia i ke Kūlana Makana no #88288

Kipa i ka Pūnaewele Nānā ma A' Design Award Hoʻolaha Nūhou Hōʻailona Makana

Nā Waihoʻoluʻu

Ka Hoʻolālā

E Pili Ana iā Dond Papa ʻaʻa Haʻahaʻa

ʻO ka maʻalahi o ka hoʻākāka ʻana o Dond ke maʻalahi akā i kahi hōʻole. Hoʻopili kahi mahele kahaha maʻalahi me ka hoʻohana ʻana i kahi paʻi 3D, a hoʻolālā i nā ʻāpana liʻiliʻi i hiki ai i ka mea hoʻohana ke hōʻiliʻili maʻalahi i ka papaʻaina a hoʻokaʻawale ʻole e hoʻomau i ka wā o ka halihali. ʻO ka pahuhopu o ka mea hoʻolālā ka mea no Dond e komo i ka mea kūʻai aku i kēlā me kēia lā e pono ai ke leʻaleʻa i kahi kūlana maʻalahi no nā manawa maʻamau i waho a i waho paha. Hoʻohana ʻo Dond i kahi hoʻolālā kūpono e like me ka papa luna ma luna ʻaʻole i hoʻopili ʻia i nā wāwae a huki koke ʻia e hoʻohana me ke koʻī.

Ka Hoʻomaikai

E Pili Ana i ka A' Design Award Keleawe

Ua lanakila ka hoʻolālā Dond Papa ʻaʻa Haʻahaʻa i ka A' Design Award Keleawe, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kūʻokoʻa i ʻike ʻia ma o ka hana noʻeau, ka akamai a me ka makakoho. He mau hana mākaukau a hana noʻeau kupaianaha nā lanakila Keleawe e hōʻoia ana i ka ʻike nui, ka noʻonoʻo a me ka maʻalea o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Dond Papa ʻaʻa Haʻahaʻa he mea i mahalo nui ʻia, hoʻohiwahiwa ʻia a aloha ʻia, he ʻoihana a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Keleawe e hoʻohui ana i nā hana maikaʻi loa o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana, a maikaʻi no kona nānā ʻana i nā kikoʻī. Hoʻokō maikaʻi ka hoʻolālā Dond Papa ʻaʻa Haʻahaʻa i nā pono, hoʻopā i ka makemake, hoʻohiwahiwa i nā manaʻo a huki i ka makemake e ʻike.

Ma Hope o ka Hoʻolālā

ʻEke Nūhou

Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.

Nā ʻAno Kūʻokoʻa: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Nā Ana a me ka Hoʻopili: Top: 330mmx330mmx15mm
Overall Height: 415mm
Nā Lepili: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
ʻEnehana Hana: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Pilikia Hoʻolālā: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Noiʻi: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Hoʻoulu Manaʻo: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Ka Lōʻihi o ka Papahana: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Kaʻina Hana: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Nā Lālā Hui: JINYANG KOO