Dond Niski Stol by Jinyang Koo is a highly esteemed winner of the very prestigious 2020 Brončana nagrada A' Design Award in Dizajn Namještaja Competition Category.

BroncaNamještaj· 2020

Dond Niski Stol

by Jinyang Koo

Client: Wuui

Brončana nagrada A' Design Award Winner in Namještaj Category

17,687

Verified Award Winner

Verify Award Status for #88288

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Dond Niski Stol

Dizajn pripovijesti Donda je jednostavnost, ali svestran. Jednostavni dijelovi za spajanje stvoreni su pomoću 3D pisača i minimalnim dizajnom dijelova kako bi potrošač mogao lako sastaviti stol ili ga rastaviti za prijevoz tijekom transporta. Cilj dizajnera bio je da Dond sudjeluje u svakodnevnim potrošačkim potrebama kako bi uživao u lakšem načinu života, bilo koje prilike u zatvorenom ili na otvorenom. Dond koristi jednostavan dizajnerski pristup kao što je to što gornja površina nije pričvršćena za noge i lako se uklanja i koristi kao pladanj.

The Recognition

About the Brončana nagrada A' Design Award

Dond Niski Stol je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da Dond Niski Stol bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, znanosti, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. Dond Niski Stol sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
Dimensions & Packaging: Top: 330mmx330mmx15mm
Overall Height: 415mm
Tags: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
Production Technology: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
Design Challenge: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
Research: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
Inspiration: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
Project Duration: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
Operation Flow: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
Team Members: JINYANG KOO