Dizayn Mira Chèz pa Cemil Yavuz se yon gayan ki gen anpil estim nan konpetisyon trè prestijye 2021 A' Design Award Fè nan Kategori Konpetisyon Dezayn Mèb.

FèMèb· 2021

Mira Chèz

pa Cemil Yavuz

Kliyan: Cemil Yavuz

Gayan A' Design Award Fè nan Kategori Mèb

10,693

Gayan Pri Verifye

Verifye Estati Pri pou #116467

Vizite Sit la Gade sou A' Design Award Kominike Laprès Badj Prim

Koulè

Konsepsyon an

Konsènan Mira Chèz

Mira se yon chèz ki fèt pou manje ak pou chita an jeneral. Chasi a fèt ak twa pwofil sikilè an asye inoksidab. De pwofil yo pliye nan menm ang lan e nan menm direksyon an, pandan twazyèm lan pliye yon lòt jan. Sifas syèj ak do ki kouvri ak twal yo tache sou chasi a, e pye an plastik ki ka ajiste wotè yo konplete chèz la. Mira lejè e li ka mete antoure yon tab oswa poukont li. Chèz la ka itilize enkline sou goch oswa sou dwat. Mira anvwaye demonte, konsa itilizatè yo ka monte chèz la apre yo fin dezanbale l.

Rekonesans lan

Konsènan A' Design Award Fè

Mira Chèz se yon ganyan A' Design Award Fè, yon rekonesans ki gen prestij yo bay bon design ki satisfè egzijans pwofesyonèl ak endistriyèl yo atann de kreyasyon ki byen fèt. Ganyan Fè yo montre gwo konpetans, espesyalizasyon wo, konpreyansyon ekspè ak kapasite kreyatif kreyatè yo. Yo atann Mira Chèz pou se yon kreyasyon anpil moun estime, admire e renmen ki pratik e inovatè. Design sa a ki ganyen A' Design Award Fè entegre pi bon pratik sektè a e li gen karakteristik teknik konpetan ki lye ak konnesans pratik ak talan. Yo respekte Mira Chèz pou jèntan li e li fèt pou bay amelyorasyon kalite lavi ki ede fè mond lan vin yon pi bon kote.

Dèyè Konsepsyon an

Dosye Laprès

Kredi, manm ekip ak detay teknik konseptè a bay.

Pwopriyete Inik: Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
Dimansyon & Anbalaj: Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions.
Etikèt: Bending, Metal Profile, Chair, Simple, Elegant
Teknoloji Pwodiksyon: The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
Defi Dizayn: Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
Rechèch: As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
Enspirasyon: In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
Dire Pwojè: The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
Fliks Operasyon: Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.