Lasso A Dekoratív Textil – tervező: Cristina Orozco Cuevas – a rendkívül rangos 2014 Bronzdíj A' Design Award díjazottja a Textil, szövet, textúra, minta és ruhaanyag tervezése versenykategóriában.
BronzTextil· 2014
Lasso A Dekoratív Textil
tervezte: Cristina Orozco Cuevas
Megbízó: Cristina Orozco Cuevas Studio
Bronzdíj A' Design Award díjazott a Textil kategóriában
Hitelesített díjazott
Díj státusz ellenőrzése: #30204A Dizájn
A Lasso A Dekoratív Textil bemutatása
A Lasso definíciója egy hosszú kötél, amelynek egyik végén futó hurok van. Ahelyett, hogy inspirálnának; ez a textil a következő eredménye. Különleges érintéssel és esztétikával rendelkezik, néhány különleges kopott csatornán kívül, így a fény nagyon halkan átjuthat. Félig ipari - félig készített, elektronikus szövőszövőbe szőtt és kézzel vágott. Ez a projekt nagyon vonzó és addiktív, mint cukorka, és textiltervezői karrierem során volt az egyik legfontosabb kihívás és felfedezés. Ez a projekt a szerendipiáról, megbotlásáról, esély felfedezéséről, erőtlenségről és balesetről szól.
Az Elismerés
A Bronzdíj A' Design Award díjról
Lasso A Dekoratív Textil a Bronzdíj A' Design Award győztese, rendkívül rangos elismerés a kreativitással, találékonysággal és éleselméjűséggel kitűnő kiemelkedő dizájnoknak. A bronzgyőztesek bőven ügyes és feltűnően kreatív alkotások, amelyek hitelesítik tervezőik hatalmas tapasztalatát, képzelőerejét és leleményességét. Lasso A Dekoratív Textil-tól azt várják, hogy nagyra becsült, csodált és kedvelt tárgy legyen, amely figyelemre méltóan professzionális és innovatív. Ez a Bronzdíj A' Design Award kitüntetést elnyert dizájn magába foglalja a művészet, a tudomány, a dizájn és a technológia legjobb gyakorlatait, és kiváló a részletekre fordított figyelmében. Lasso A Dekoratív Textil remekül kielégíti a szükségleteket, megérinti a vágyakat, elbűvöli az érzéseket, és vonzza a kíváncsiságot.
A Dizájn Mögött
Sajtóanyag
A tervező által megadott közreműködők, csapattagok és technikai részletek.
- Egyedi tulajdonságok
- half industrial - half crafted, designed with textile CAD software, woven in jacquard electronic looms and cut by hand. It is woven industrially, but cut by hand which gives job to machines and external people. It forms vertical channels as a kind of fray where the light can pass through very sofltly. The frays are crafted processes and lasts months. A fabric with this kind of processes in the industry mills is nearly impossible but not that much.
- Méretek és csomagolás
- Widths available: 1.40 m and 2.80 m. Rapport repeat: 35 cm width x 25 cm height. Uses: lamps, pillows, bedscarfs and decorative curtains. As a finish ironing the loose fur brings more volume and the frayed channels are more obvious. It is of massive production and the loose yarns are strongly moored with a tafeta special weave union.
- Címkék
- Jacquard, textile, decoration, fabric, lasso, half indusrtrial, half handmade, fur
- Gyártástechnológia
- All polyester dyed yarns woven in Jacquard electronic looms. The floated yarns are cut manually by a special tool we call knife shutter. The weave technique is very old (double fabric). However the important aspect is how I applied the weaves interlaced in order to be viable to be produced and not just as a prototype as good productivity performance. The special tool developed reminded textile engineers old techniques to make corduroy.
- Design kihívás
- At the beginning the aim was to develop a fabric with square bags. It would have little bags to put inside tools or jewelry. After weaving and testing different techiques, this came up as a serendipity all of it. There were more than 10 previews designs to get to the final lasso fabric. The weaves interaction result was floats in warp and weft. To cut the yarns in vertical and horizontal, we developed a special tool that works as a long shuttle knife to have a better and faster production. It was an enormous challenge to have it accomplished as a product and to convince the mill that it would work.
- Kutatás
- The research was completely experimental. Textile engineers were afraid that using this technique on industrial looms could not work, specially the machines weaving. The process of cutting the loose yarns was hard in order to bring a product that because of the hand crafted process would not be so expensive that would not work with the market prices. Besides the lead time to deliver a roll of this product within 3 weeks at least. Since warping process till the client's door. The cut part can be done by external workers so other people get a job.
- Inspiráció
- I named it lasso as a long rope with a running noose at one end. This project can be described as: experimentation. This fabric started with the research of something very different from the result. More than inspiration this project is about having luck, stumbling upon, chance discovery, fortuity and accident. It is a piece of hard work, research, mulish and not withdraw.
- Projekt időtartama
- The project started in March, 2012 and ended in September, 2012.
- Működési folyamat
- It has a special appearance as it seems as an extra application or embroidery upon the fabric but in fact it is woven like that. People always want to touch first than see the furry yarns. If there is light behind the soft feeling is quite special and light passes through the frayed parts. This kind of textile can replace goose feathers.
- Csapattagok
- Cristina Orozco Cuevas
Szponzorált
Fedezzen fel többet a Designers.org-on túl
Fedezze fel hirdetési partnereink termékeit, szolgáltatásait és lehetőségeit.
Továbbiak felfedezése
Kapcsolódó dizájnok
Fedezzen fel további díjnyertes dizájnokat ugyanabból a kategóriából, érdem alapján válogatva.