Hydrospine Pemberat Freediving oleh Ludovic Lahccen and Raoul Morel

Karya Hydrospine Pemberat Freediving oleh Ludovic Lahccen and Raoul Morel adalah pemenang yang sangat dihormati dari 2023 A' Design Award Perak yang sangat bergengsi dalam Kategori Kompetisi Desain Perlengkapan Olahraga, Kebugaran dan Rekreasi.

PerakPerlengkapan Olahraga· 2023

Hydrospine Pemberat Freediving

oleh Ludovic Lahccen and Raoul Morel

Klien: Apnea Sub

Pemenang A' Design Award Perak dalam Kategori Perlengkapan Olahraga

755,954

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan untuk #148412

Kunjungi Situs Lihat di A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desain

Tentang Hydrospine Pemberat Freediving

Sistem pemberat punggung untuk menyelam bebas, yang memungkinkan keseimbangan dan daya apung yang sangat presisi. Asetnya, kapasitas muatannya yang modular dan cepat, hingga 6 kg, dapat digunakan di posisi apa pun, disiplin selam bebas apa pun. Dilengkapi dengan gesper pelepas cepat dan penyesuaian untuk menyesuaikan dengan ukuran yang berbeda, apa pun jenis kelaminnya, menawarkan kenyamanan luar biasa yang dengan cepat membuat Anda lupa akan beban yang dibawa. Desainnya berasal dari perpaduan hewan laut dan perlengkapan yang diciptakan untuk kecepatan guna memberikan garis yang sangat hidrodinamik dan menawarkan luncuran optimal di bawah air. Fleksibilitasnya menjadikannya konsep yang unik

Pengakuan

Tentang A' Design Award Perak

Hydrospine Pemberat Freediving adalah pemenang A' Design Award Perak, pengakuan yang sangat bergengsi yang diberikan kepada desain kelas atas yang indah dan mengesankan. Pemenang Perak adalah karya yang sangat cemerlang dan sangat kreatif yang menggambarkan keahlian, bakat, dan ketajaman luar biasa para desainernya. Hydrospine Pemberat Freediving diharapkan menjadi karya yang menakjubkan, etalase keahlian, sangat profesional, dan sangat inovatif. Desain pemenang A' Design Award Perak ini adalah penemuan yang sangat menonjol dan dikagumi yang bermanfaat bagi dan memajukan batas-batas seni, sains, desain, dan teknologi. Hydrospine Pemberat Freediving adalah kreasi yang sangat dicemburui yang membangkitkan keinginan, membawa perasaan positif, dan memercikkan keheranan dan kekaguman.

Di Balik Desain

Kit Pers

Kredit, anggota tim, dan detail teknis yang disediakan oleh desainer.

Keunikan: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimensi & Kemasan: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Tag: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Teknologi Produksi: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Tantangan Desain: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Riset: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspirasi: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Durasi Proyek: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Alur Operasi: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Paten: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Anggota Tim: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Kredit Gambar: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel