Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik nke Jaroslaw Markowicz

Ihe emepụtara bụ Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik nke Jaroslaw Markowicz bụ onye meriri a na-asọpụrụ nke ukwuu nke 2020 Ihe Nrite A' Design Award nke Ọlaọcha na Udi Asọmpi Nhazi Ihe Owu Ụlọ na Akụkụ Owu Ụlọ.

ỌlaọchaAkụkụ Owu Ụlọ· 2020

Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik

nke Jaroslaw Markowicz

Onye Ahịa: Phoenix Enterprise

Onye Meriri Ihe Nrite A' Design Award nke Ọlaọcha na Udi Akụkụ Owu Ụlọ

34,482

Onye Meriri Onyinye A Kwadoro

Nyochaa Ọnọdụ Onyinye maka #102697

Lee na A' Design Award Akụkọ Mgbasa Ozi Akara Onyinye

Agba

Nhazi a

Maka Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik

Solarbreaker bụ ihe mkpuchi ihu ụlọ nke fotovoltaik na-eme ka elu ụlọ ghọọ ihe na-emepụta ike. Usoro a dabeere na profaịlụ aluminum a na-apịpụta apịpụ nke a na-etinye panel anyanwụ na ya. A na-eme ka panel ọ bụla dabere n'akụkụ iri anọ na ise iji nweta arụmọrụ dị elu, otu modul nke otu mita square nwere ike ịkwado bọlbụ LED iri na isii. Njikọ chọrọ ihe ọ bụla fọrọ nke nta ka ọ bụrụ ngwá ọrụ, n'ihi na a na-etinye profaịlụ ahụ n'elu ihe mgbakwunye ma na-akpọchi ya n'okpuru arọ nke onwe ya. A na-ezochi eriri n'ime profaịlụ. Ewezuga ihu ụlọ, otu akụkụ ndị ahụ nwere ike ịmepụta ọgbọ, ihe mgbochi na ihe mkpuchi.

Nkwanye Ugwu

Maka Ihe Nrite A' Design Award nke Ọlaọcha

Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik meriri A' Design Award nke Ọlaọcha, nnabata dị oke ugwu e nyere design ndị dị n'ọkwa kachasị elu, mara mma ma na-eju anya. Ndị meriri na Ọlaọcha bụ ọrụ na-egbu maramara nke ukwuu ma dị oke nzụlite nke na-egosi ọmarịcha ihe ọmụma, talent na nghọta nke ndị designer ha. A na-atụ anya na Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik ga-abụ ọrụ dị ịtụnanya, ihe nlereanya, nke dị oke ọrụ ma dị omimi n'ihe ọhụrụ. Design a meriri A' Design Award nke Ọlaọcha bụ ihe e mepụtara dị oke ịrịba ama, nke a na-eto nke na-erite uru ma na-ebuga oke nka, sayensị, design na teknụzụ n'ihu. Solarbreaker Ọrụ Bụ Isi: Ihe Mkpuchi Ihu Ụlọ Nke Fotovoltaik bụ ihe e kere eke ọtụtụ ndị na-ekwo ekworo ya nke na-akpali ọchịchọ, na-eweta mmetụta ọma ma na-akpali ịtụnanya.

N'azụ Nhazi a

Ngwugwu Mgbasa Ozi

Nkwurịta okwu, ndị otu na nkọwa teknụzụ nke onye nhazi nyere.

Àgwà Pụrụ Iche: Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
Nha & Mkpuchi: Basic module dimensions 1000mm x 120 mm x 1000mm
Mkpado: Solar panels, photovoltaic, facade shutter, architecture, fence
Teknụzụ Mmepụta: The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
Ịma Aka Imepụta: The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
Nchọpụta: The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
Mkpali: The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
Oge Ọrụ: the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
Usoro Ọrụ: Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
Ndị Otu: Jarosław Markowicz, Daniel Ziomek