Arch Stóll, Bakleysustóll eftir Edvard Glazebrook

Hönnunarverkið Arch Stóll, Bakleysustóll eftir Edvard Glazebrook er hávirt verðlaunaverk sem hlaut hin virtu 2021 A' Design Award í bronsi verðlaun í keppnisflokknum Húsgagnahönnun.

BronsHúsgögn· 2021

Arch Stóll, Bakleysustóll

eftir Edvard Glazebrook

Handhafi A' Design Award í bronsi í flokknum Húsgögn

11,029

Staðfestur verðlaunahafi

Staðfesta verðlaunastöðu fyrir #106853

Skoða hjá A' Design Award Fréttatilkynning Verðlaunamerki

Litir

Hönnunin

Um Arch Stóll, Bakleysustóll

Arch er stóll og bakleysusæti úr útskornu og svartbæsuðu límtré úr furu. Hönnunin byggir á einföldum og endurteknum formum og lögun, sem gefa húsgagninu einsleita og rökrétta framsetningu. Fimm eins bogar mynda fæturna og bakið á stólnum, en bakleysusætið er gert úr þremur hálfbogum sem mætast í miðjunni. Allir hlutar eru skornir úr límtrésplötu með CNC-fræsara, síðan límdir og festir saman með trénöglum. Bogarnir styrkja húsgagnið á veikustu punktum þess.

Viðurkenningin

Um A' Design Award í bronsi

Arch Stóll, Bakleysustóll vann A' Design Award í bronsi, mjög virta viðurkenningu sem veitt er framúrskarandi hönnunarverkum sem einkennast af sköpunargáfu, hugvitssemi og skarpskyggni. Sigurvegarar í bronsi eru ríkulega leiknir og áberandi skapandi gripir sem staðfesta víðtæka reynslu, ímyndunarafl og útsjónarsemi hönnuða sinna. Þess er vænst að Arch Stóll, Bakleysustóll sé mjög metinn, dáður og elskaður hlutur sem er einstaklega fagmannlegur og nýstárlegur. Þetta hönnunarverk sem vann A' Design Award í bronsi felur í sér bestu starfsvenjur í list, vísindum, hönnun og tækni og er framúrskarandi fyrir athygli sína á smáatriðum. Arch Stóll, Bakleysustóll fullnægir þörfum á dásamlegan hátt, snertir langanir, heillar tilfinningar og vekur forvitni.

Á bak við hönnunina

Fjölmiðlapakki

Heimildir, hópmeðlimir og tæknilegar upplýsingar frá hönnuðinum.

Einstakar eiginleikar: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Stærðir og umbúðir: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Merki: Wood, Chair, Stool, Pine wood, Arches, Curve
Framleiðslutækni: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Hönnunaráskorun: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Rannsóknir: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Innblástur: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Lengd verkefnis: The project started in march 2020 - and finished in late May 2020.
Verkflæði: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Einkaleyfi: Copyrights belong to Edvard Glazebrook, 2020
Liðsmenn: Edvard Glazebrook