Aspen Testa per treppiede di Colorado Tripod Company

Il progetto Aspen Testa per treppiede di Colorado Tripod Company è un vincitore molto stimato del prestigioso 2021 A' Design Award d'Argento nella categoria Design di Fotocamere e Attrezzature Fotografiche.

ArgentoAttrezzatura Fotografica· 2021

Aspen Testa per treppiede

di Colorado Tripod Company

Cliente: Colorado Tripod Company

Vincitore del premio A' Design Award d'Argento nella categoria Attrezzatura Fotografica

39,753

Vincitore del Premio Verificato

Verifica lo Stato del Premio per #108315

Visita il sito Vedi su A' Design Award Comunicato stampa Badge del premio

Colori

Il Design

Informazioni su Aspen Testa per treppiede

Aspen è una testa per treppiede progettata per semplificare la composizione fotografica. Una struttura aperta consente alla fotocamera montata di ruotare ben oltre i 90 gradi in entrambe le direzioni, permettendo rapidi passaggi tra l'orientamento orizzontale e verticale senza ingombranti staffe a L. La sfera presenta un nucleo cavo con fori che ne riducono il peso mantenendone la resistenza. Un morsetto a leva regolabile accoglie un'ampia gamma di piastre per fotocamere, un controllo della frizione regola la resistenza e un blocco panoramico consente la rotazione completa per fotografie panoramiche. Aspen è lavorata a macchina in alluminio anodizzato duro.

Il Riconoscimento

Informazioni sul A' Design Award d'Argento

Aspen Testa per treppiede ha vinto l'A' Design Award d'Argento, un riconoscimento enormemente prestigioso conferito a design di fascia alta, splendidi e impressionanti. I vincitori d'Argento sono opere tremendamente brillanti ed estremamente creative che illustrano l'eccezionale competenza, il talento e l'acume dei loro designer. Ci si aspetta che Aspen Testa per treppiede sia un'opera meravigliosa, una vetrina di eccellenza, notevolmente professionale e profondamente innovativa. Questo design vincitore dell'A' Design Award d'Argento è un'invenzione molto notevole e ammirata che giova ai confini dell'arte, della scienza, del design e della tecnologia e li fa avanzare. Aspen Testa per treppiede è una creazione molto invidiata che evoca desideri, porta sentimenti positivi e accende meraviglia e stupore.

Dietro il Design

Press Kit

Crediti, membri del team e dettagli tecnici forniti dal designer.

Proprietà Uniche: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Dimensioni e Confezionamento: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Tag: tripod head, ball head, camera support, tripod, photography accessory
Tecnologia di Produzione: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Sfida Progettuale: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Ricerca: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Ispirazione: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Durata del Progetto: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Flusso Operativo: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Brevetti: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Membri del Team: Colorado Tripod Company