DefeXtiles Teknik Fabrikasi Tekstil dening Jack Forman

Karya DefeXtiles Teknik Fabrikasi Tekstil dening Jack Forman minangka pemenang sing diajeni banget saka A' Design Award Perunggu 2021 sing bergengsi ing Kategori Kompetisi Desain Wujud lan Produk Cetak 3D.

PerungguCetak 3D· 2021

DefeXtiles Teknik Fabrikasi Tekstil

dening Jack Forman

Klien: Tangible Media Group, MIT Media Lab

Pemenang A' Design Award Perunggu ing Kategori Cetak 3D

33,223

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan kanggo #112633

Kunjungi Situs Deleng ing A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desaine

Babagan DefeXtiles Teknik Fabrikasi Tekstil

DefeXtiles minangka teknik kanggo ngasilake tekstil tipis lan lentur nggunakake printer 3D standar. Metode iki ngontrol under-extrusion supaya kebentuk gumpalan-gumpalan cilik kanthi untaian tipis ing antarane. Celah periodik sing diasilake njalari kain hasil cetakan katon kaya tekstil, bisa ambegan (breathable), lentur, lan bisa mulur, sanajan nganggo bahan sing kaku kaya asam polilaktik (PLA). Tekstil iki dicithak tegak lurus karo bidang cetak (print bed), saengga bisa digawe wangun sing dilempit lan mlengkung. Aplikasine kalebu busana, antarmuka sing bisa dirasakake (tangible interfaces), lan kok bulu tangkis. Filamen konduktif bisa ditandhukake ing njero kain kanggo mbentuk jejak sirkuit.

Pangakuan

Babagan A' Design Award Perunggu

DefeXtiles Teknik Fabrikasi Tekstil menang A' Design Award Perunggu, pangenalan sing prestisius banget sing diparingake marang desain sing luar biasa sing dicirikake dening kreativitas, kapinteran lan kaweruh sing landhep. Pemenang Perunggu iku artefak sing trampil banget lan kreatif banget sing mbuktekake pengalaman sing jembar, imajinasi lan kapinteran para desainer. DefeXtiles Teknik Fabrikasi Tekstil dikarepake dadi barang sing dihargai banget, dikagumi lan ditresnani, profesional lan inovatif banget. Desain sing menang A' Design Award Perunggu iki ngemot praktik sing paling apik ing seni, sains, desain lan teknologi, lan apik banget ing perhatiane marang rincian. DefeXtiles Teknik Fabrikasi Tekstil nyukupi kabutuhan kanthi apik, nutul kekarepan, ngaya rasa lan narik rasa pengin weruh.

Ing Mburi Desain

Kit Pers

Kredit, anggota tim lan detail teknis sing diwenehake dening desainer.

Sifat Unik: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tag: textile, 3d print, lace, advanced manufacturing, fabric
Teknologi Produksi: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Tantangan Desain: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Riset: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirasi: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Durasi Proyek: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Alur Operasi: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Anggota Tim: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii