Oak Konan Shinagawa Gedhung Kantor dening Obayashi Corporation

Karya Oak Konan Shinagawa Gedhung Kantor dening Obayashi Corporation minangka pemenang sing diajeni banget saka A' Design Award Perak 2023 sing bergengsi ing Kategori Kompetisi Desain Arsitektur, Bangunan lan Struktur.

PerakArsitektur· 2023

Oak Konan Shinagawa Gedhung Kantor

dening Obayashi Corporation

Klien: Obayashi-Shinseiwa Real Estate Corporation

Pemenang A' Design Award Perak ing Kategori Arsitektur

17,399

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan kanggo #149620

Deleng ing A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desaine

Babagan Oak Konan Shinagawa Gedhung Kantor

Oak Konan Shinagawa iku gedhung kantor 12 lantai sing dumunung ing sacedhake palabuhan ing Tokyo, Jepang. Rangka njaba sing awujud kisi-kisi putih iku cangkang njaba sing digawe saka beton pracetak lan nduweni fungsi minangka rangka struktural sekaligus piranti panahan srengenge. Digabungake karo konstruksi baja ing bagean inti, struktur hibrida iki nyiptakake ruang kantor tanpa pilar sing ngidini tata letak sing fleksibel. Pilar lan balok pracetak diprodhuksi ing sanjabane lokasi lan diudhunake menyang panggonane saka ndhuwur, saengga nggampangake pagawean ing lokasi. Jendhela njaba dilengkapi unit ventilasi alami sing bisa dibukak nganggo gagang sing bisa dicopot.

Pangakuan

Babagan A' Design Award Perak

Oak Konan Shinagawa Gedhung Kantor menang A' Design Award Perak, pangenalan sing prestisius banget sing diparingake marang desain tingkat dhuwur, endah lan nggumunake. Pemenang Perak iku karya sing sumunar banget lan kreatif banget sing nggambarake kaprigelan, bakat lan kaweruh para desainer. Oak Konan Shinagawa Gedhung Kantor dikarepake dadi karya sing nggumunake, conto teladan, profesional banget lan inovatif banget. Desain sing menang A' Design Award Perak iki iku panemuan sing luar biasa banget lan dikagumi sing paring manfaat lan nyurung maju wates seni, sains, desain lan teknologi. Oak Konan Shinagawa Gedhung Kantor iku ciptaan sing akeh sing ngirenake sing nggugah kekarepan, nggawa perasaan positif lan nuwuhake gumun lan kagum.

Ing Mburi Desain

Kit Pers

Kredit, anggota tim lan detail teknis sing diwenehake dening desainer.

Sifat Unik: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Ukuran & Kemasan: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Tag: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Teknologi Produksi: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Tantangan Desain: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Riset: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Inspirasi: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Durasi Proyek: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Alur Operasi: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Anggota Tim: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Kredit Gambar: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022