C3 Sterilization Wastafel Pawon dening Nuomi

Karya C3 Sterilization Wastafel Pawon dening Nuomi minangka pemenang sing diajeni banget saka A' Design Award Perak 2025 sing bergengsi ing Kategori Kompetisi Desain Prabot Pawon, Peralatan lan Piranti.

PerakPrabot Pawon· 2025

C3 Sterilization Wastafel Pawon

dening Nuomi

Klien: Guangdong Nuomi Home Intelligent Technology Co.,Ltd

Pemenang A' Design Award Perak ing Kategori Prabot Pawon

48,693

Pemenang Penghargaan Terverifikasi

Verifikasi Status Penghargaan kanggo #172108

Deleng ing A' Design Award Siaran Pers Lencana Penghargaan

Warna

Desaine

Babagan C3 Sterilization Wastafel Pawon

C3 Sterilization iku wastafel pawon kanthi perawatan talenan sing terintegrasi. Kompartemen sing wis kapasang ing njero nggunakake sinar ultraviolet lan sirkulasi hawa panas kanggo nyeterilake lan ngeringake talenan sajrone 15 menit. Proses perawatan diwiwiti kanthi otomatis nalika talenan diselehake ing njero, lan strip lampu sensor nuduhake status kerjane. Tembok njero dilapisi lapisan nano hidrofobik supaya tahan gores lan bisa resik dhewe, dene pipa saluran banyu duwe lapisan ion perak antibakteri. Desain panyimpenan vertikal kanthi rak lading magnetik ngirit papan ing pawon sing ciyut.

Pangakuan

Babagan A' Design Award Perak

C3 Sterilization Wastafel Pawon menang A' Design Award Perak, pangenalan sing prestisius banget sing diparingake marang desain tingkat dhuwur, endah lan nggumunake. Pemenang Perak iku karya sing sumunar banget lan kreatif banget sing nggambarake kaprigelan, bakat lan kaweruh para desainer. C3 Sterilization Wastafel Pawon dikarepake dadi karya sing nggumunake, conto teladan, profesional banget lan inovatif banget. Desain sing menang A' Design Award Perak iki iku panemuan sing luar biasa banget lan dikagumi sing paring manfaat lan nyurung maju wates seni, sains, desain lan teknologi. C3 Sterilization Wastafel Pawon iku ciptaan sing akeh sing ngirenake sing nggugah kekarepan, nggawa perasaan positif lan nuwuhake gumun lan kagum.

Ing Mburi Desain

Kit Pers

Kredit, anggota tim lan detail teknis sing diwenehake dening desainer.

Sifat Unik: The C3 sterilization sink, centering around the concept of an integrated healthy kitchen, innovatively incorporates cutting board care features, with the whole care process completed in 15 minutes. UV radiation and hot air circulation for cutting board sterilization, coupled with an integrated compartment and an innovative nano hydrophobic coating, enable the product to address single functionality of traditional sinks, bacterial growth of cutting boards, and poor space utilization of kitchens.
Ukuran & Kemasan: 780*482*220mm
Tag: integrated healthy kitchen, sink with cutting board care features, cleaning, drying and sterilization, integrated compartment, auto start or stop, storage, safety, hygiene
Teknologi Produksi: The inner walls of the sink and the compartment are made of a GB 4806.9 material, and employ a nano hydrophobic coating with a contact angle of 110 degrees, achieving scratch resistant and self cleaning properties. The drainage pipe coated with an antibacterial silver ion layer kills 99.9 percent of bacteria. The fully sealed circuit system boasts an IPX7 waterproof rating, complemented by a UV lamp monitor that automatically alerts users after 6,000 hours of use, ensuring safety and durability.
Tantangan Desain: The challenge was how to satisfy the demand of users for a hygienic, efficient kitchen. To address that, the C3 sterilization sink is equipped with dual sterilization units, including UV radiation and hot air circulation, allowing for efficient sterilization with low energy consumption. An integrated compartment supports cutting board care and knife storage to effectively simplify operation for users. The application of a multimodal sensor enables precise recognition for auto start or stop.
Riset: In the post pandemic era, consumers pay more attention to kitchen health, and increasing small sized residences stimulate the demand for space integration. However, traditional independent sinks and sterilizers fail to meet the requirements of modern kitchens in efficiency, health, and tidiness. The C3 sterilization sink actively responds to upgraded health awareness and more compact living spaces in modern society through technological integration and spatial optimization.
Inspirasi: It was found that the bacteria levels of cutting boards in 70% of households exceed safe limits. This sink integrates medical grade sterilization technology and a miniaturized drying unit. Moreover, it draws on vertical storage design from Japanese kitchens to optimize spatial utilization, while also supporting auto start or stop and incorporating a magnetic knife rack. This product enables professional sterilization in home settings, creating a healthy, efficient, and tidy kitchen ecosystem.
Durasi Proyek: The project started in Guangdong in April, 2023 and finished in August, 2024. The product was launched in China in September, 2024.
Alur Operasi: UV radiation and hot air circulation automatically start once the cutting board is placed into the compartment, with the whole care process completed in 15 minutes without any manual operation.
A smart sensor light strip indicates the working status, and the UV unit is linked with the door switch to ensure safety during sterilization.
A vertical storage design, paired with a magnetic knife rack, allows users to smoothly access and store knives, significantly enhancing efficiency.