Solitaire Twisted 반지 by Bettina Gomez-Latus

Solitaire Twisted 반지 by Bettina Gomez-Latus is a highly esteemed winner of the very prestigious 2020 A' Design Award 동상 in 주얼리 디자인 Competition Category.

동주얼리· 2020

Solitaire Twisted 반지

by Bettina Gomez-Latus

Client: 1Karat - Atelier für Schmuck & Design - Bettina Gomez-Latus

A' Design Award 동상 Winner in 주얼리 Category

20,807
Verified Award Winner
Verify Award Status for #103001

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Solitaire Twisted 반지

반지는 플래티넘 952로 제작되었으며 1캐럿 다이아몬드가 세팅되어 있습니다. 흐르는 듯한 형태와 높은 착용감이 특징입니다. 트위스트 세팅은 다이아몬드를 위쪽으로 잡아당기는 동시에 가벼운 느낌을 줍니다. 콤팩트한 세팅에도 불구하고 다이아몬드는 측면 투명성으로 인해 강한 광채를 얻습니다. 위에서 보면 이 작은 비밀은 보이지 않습니다.

The Recognition

About the A' Design Award 동상

Solitaire Twisted 반지, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Solitaire Twisted 반지, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Solitaire Twisted 반지, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: This ring is characterized by clear lines, a flowing form and a high level of wearing comfort. The twisted setting stretches the diamond upwards and at the same time gives it a lightness that is created by the transparency of the twisted ring band. Seen from above, the little secret of this lightness cannot be seen, because despite the compact setting, the diamond has a strong luminosity due to the lateral transparency.
Dimensions & Packaging: Ring size: Ø 54, Platinum 952, Diamond Ø 6.5 mm TW vsi 1.0 ct.
Tags: ring, brilliant, platinum, diamond, jewelry design, jewelry, gemstones, handmade
Production Technology: The ring was designed on a computer using CAD, plotted in wax and cast in platinum 952. The casting was finished at the workbench and the diamond was set.
Design Challenge: The most difficult part of designing this object was getting the ring ready for serial production in a wide variety of alloys, stone and ring sizes without changing the proportions of the entire ring during production.
Research: In order to create the ring, it was necessary to examine how much the ring band could be tapered and still maintain the tension of the twisted setting while holding the gemstone. This was necessary because the setting was subject to considerable pressure and the spiral was not allowed to compress.
Inspiration: The inspiration for this solitaire ring was to construct everything from one wire. It should be light and yet compact. An engagement ring should be created that is clear in its form and soft in its appearance. The ring should also be very comfortable and wearable at any occasion. It should not be the usual narrow and conical closed setting often chosen for engagement rings, it should move to a new type of setting that comes from the ring band itself.
Project Duration: The project started in May 2018 and ended in July 2019. The ring is produced in Steinbach (Taunus), Germany.
Operation Flow: During the development of the ring, the concentration was on the setting. The diamond should be firmly set, nothing should disturb the simplicity of the setting and the ring band and yet there should be tension in the statement of the ring. The twist of the upper ring band which holds the setting of the diamond made this possible. The setting with the diamond seems to float
Image Credits: All Fotos by Atelier Bettina Gomez-Latus