디자이너 Kevin Bailey의 작품 Calibre 웨어러블 대사 측정기은(는) 매우 권위 있는 2022 A' Design Award 동상의 웨어러블 기술 디자인 부문에서 탁월한 수상작입니다.

동웨어러블 기술· 2022

Calibre 웨어러블 대사 측정기

디자이너: Kevin Bailey

클라이언트: Calibre

웨어러블 기술 부문 A' Design Award 동상 수상작

501,924

인증된 수상작

#138432 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Calibre 웨어러블 대사 측정기 소개

칼리버(Calibre)는 호흡을 실시간으로 측정하는 웨어러블 대사 측정기입니다. 가스 센서와 압력 센서는 페이스피스에 클립으로 부착되는 작고 가벼운 무선 모듈에 내장되어 있습니다. 페이스피스는 투명 플라스틱으로 제작되었으며, 코 아래에 밀착되는 부드러운 실리콘 개스킷이 적용되었습니다. 조절 가능한 헤드 스트랩이 호흡이나 발화를 방해하지 않으면서 페이스피스를 안정적으로 고정합니다. 센서는 기류, 산소, 이산화탄소, 습도 및 온도를 기록합니다. 연동된 애플리케이션이 측정값을 표시하여 일상 활동과 운동이 신체에 미치는 영향을 지속적으로 확인할 수 있습니다.

수상 인정

A' Design Award 동상 소개

Calibre 웨어러블 대사 측정기, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Calibre 웨어러블 대사 측정기, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Calibre 웨어러블 대사 측정기, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Functional, aesthetically pleasing, and lightweight. Calibre packs a suite of gas and pressure sensors into a tiny, portable, wireless electronics module that clips to a comfortable face piece. Users can go anywhere and do anything, tracking dozens of real-time metabolic & respiratory biometrics, measured up to 50X per second. Activity agnostic with 14 hours of battery life, it features a tracking app to collect real-time data on airflow composition, to monitor daily activity effects on the body.
치수 및 패키징: Calibre is wireless and approximately 50g in weight and includes 10mm wide elastic clear silicon head straps with OTS cord locks or 133mm stretchable fabric strap with snap adjustable headband. Modular constructed from antibacterial polymer and comprises rechargeable lithium polymer battery pack 3.7V, LED indicators, gas sensors, Bluetooth radio and microprocessor. A clear Tritan and Silicone headpiece with Hydrophilic Anti fog and measures 100MM X 85MM X 60MM.
태그: Wearable Device, metabolic tracker, respiratory, biometrics, fitness
생산 기술: An adjustable head strap and hypoallergenic silicone gasket for a gentle secure rest below the nose. The mask is made of polycarbonate outer housings with a clear Tritan plastic anti fog facepiece, and an over-molded LSR silicone gasket. The head strap was designed with spandex, polyurethane foam, and an acrylic pile with adjustable strap hardware. A custom flex CCA was developed with pressure, CO2, O2, humidity, and temp sensors to measure breath flow and composition to determine real-time metabolics and respiration.
디자인 과제: Packaging multiple sensing elements into a comfortable and functionable wearable metabolic tracking device, giving users access to real time data to monitor metabolics and performance improvements. This insight was previously only available at medical or lab facilities. Another challenge was developing custom testing and verification equipment and methods required to calibrate accurate data metrics. Sensor characterizations were refined in development process to validate product performance for repeatable and accurate functions.
연구: Fluid dynamics, new sensor technologies, physiological research and testing to create hardware, circuits and firmware system in ultralight form factor for accurate measurement of respiratory flow & composition, Human anthropometrics analysis of facial structures and 3D prototype and user testing for face fit and breathing comfort. Automated testbeds with mannequin heads, pumps and calibrated gas inputs for measurement accuracy. Solving for variability between nasal and oral breathing, and as dynamic range between rest vs exercise, and managing condensation.
영감: Calibre was inspired by a belief that access to meaningful, reliable data can improve everyday health and performance. Breath measurement is the most accurate way to measure metabolic activity, yet these tools were only available in labs and hospitals. Calibre is a wearable, real-time fitness metabolic tracker that measures breath flow and caloric burn of carbohydrates vs. fats, and oxygen uptake and other respiratory parameters. The data influences how daily routines and exercise affect the body and respiratory system.
프로젝트 기간: Initial project concept design and marketing research began early 2020 at Ottawa based Design 1st kicking off with R&D testing, detailed design, prototypes testing, and parts specification that spanned to mid-2021. Calibre is expected to launch in mass market in the Summer 2022.
운영 흐름: Calibre is designed with no restrictions in breathing or talking no matter the activity. It is comfortable, functional, aesthetic, and lightweight, featuring adjustable Velcro tabs and the right pressure for a comfortable fit and an air seal around the nose and mouth for accurate breath measurement. A precise tracking app and multiple gas sensors measure the composition and breath flow with remarkable accuracy. The data lets the user know how their daily activity routine affects their body.
특허: Multiple system, method and design patents pending worldwide.
팀원: Chris Edwards, Senior Product Designer, Client Project Lead

Pat Williams, Senior Product Designer

Phillippe Genereux, Senior Mechanical Designer

Vimal Chandran, Software Designer

Don Larisey, Senior PCB Designer

Stever Harrington, Senior Hardware Engineer

Julio Escudero, Hardware Engineer

Joan Highet, VP Marketing Services

Dave Ingram, VP Manufacturing Services
이미지 출처: The name and logo of Calibre are trademarks of Calibre Biometrics Inc.