디자이너 Sapiens Design Studio의 작품 Pan 옷걸이는은(는) 매우 권위 있는 2022 A' Design Award 동상의 가구 디자인 부문에서 탁월한 수상작입니다.

동가구· 2022

Pan 옷걸이는

디자이너: Sapiens Design Studio

클라이언트: Nestart

가구 부문 A' Design Award 동상 수상작

11,579

인증된 수상작

#140211 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Pan 옷걸이는 소개

팬(Pan)은 중앙 조인트로 연결된 세 개의 강철 요소로 구성된 옷걸이입니다. 각 구성 요소는 산업용 레이저 절단 공정에서 나오는 폐강판을 재사용하여 얻습니다. 각 구성 요소는 가능한 한 많은 재료를 재사용할 수 있도록 크기가 조정됩니다. Pan은 다면적인 물체이며, 2차원 시트는 새로운 3차원 미학, 조각적 가치를 지닌 다면적인 볼륨을 취합니다. 각 팬은 진행 중인 생산 과정에서 요소가 슬래브에 무작위로 배열되는 방식에 따라 디자인이 달라지기 때문에 고유합니다.

수상 인정

A' Design Award 동상 소개

Pan 옷걸이는, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Pan 옷걸이는, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Pan 옷걸이는, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Pan is a coat rack entirely made of recovered steel. Its components are obtained from the design and optimization of waste materials, coming from the industrial processes of steel laser cutting. The two-dimensional sheet takes on a new three-dimensional aesthetic, a faceted volume with a sculptural value that dialogues with light and the environment. Each Pan is unique because its pattern depends on how the elements are randomly arranged in the slab during the laser cutting process.
치수 및 패키징: High coat racks: 506 mm, 440 mm, 1800 mm
Short coat racks: 412 mm, 444 mm, 1450 mm
태그: coat rack, recovered steel, laser-cut, circular economy
생산 기술: Pan is made of high quality SSAB Swedish Steel to obtain a long-lasting, non-deformable product, which is also resistant to oxidation. The laser cutting process takes place on standard 1488 mm x 2990 mm sheets. Both small components intended for industry and Pan parts are extracted from a sheet. They are finished with simple folding and surface finishing operations. From 2 sheets, 3 high and 4 short Pans are extracted. The waste of material is practically zero, as are the CO2 emissions that would derive from its regeneration.
디자인 과제: The main challenges were the following:
Finding internal logistic solutions that could foster the development of the project, taking into account the company's productive cycle.
Designing the waste by optimizing the arrangement of the cuts, according to particular geometries, identifying the optimal thicknesses of the material and keeping laser cutting process smooth in order to optimize production times.
Studying a multifaceted shape capable of exceeding two-dimensionality, harmoniously enhancing the aesthetics of the pattern obtained.
연구: Pan follows a circular economy philosophy applied to the processing of laser cut steel. The desire to enhance waste material has led us to design components obtained from the same plate used to make other elements for the mechanical industry, which, once extracted, determine Pan's decorative pattern.
Pan's shape is the result of the slab's layout study, aimed at exploiting as much material as possible.
Thus, the waste is designed as well as the primary mechanical components of production: in this way, it acquires a new life and the environmental impact necessary for its regeneration is reduced almost to zero.
영감: The project stems from the desire to enhance the scraps derived from the processing of laser-cut steel plates, avoid their waste and reuse them to create new products with a unique value.
Pan, the deity of the forests, is inspired by nature, large corals and shrub textures. Its organic value goes beyond the strength of metal, an inherently cold and rigid material, and reinterprets it through innovative shapes.
프로젝트 기간: The project was conceived by the Sapiens Design studio in Milan in 2021 and put into practice by Nestart srl, based in Rolo (RE). It was first presented during the Milan Design Week in September 2021.
운영 흐름: Pan is a multifaceted object that requires an all-round interpretation. It changes with light and movement, creating an overlapping of planes, textures and shapes. Pan interacts with the surrounding space, generating changing and interesting shadows. Its organic shape is the result of simple processes: the three components, joined by a central joint, offer up to 4 hangers of different heights.
이미지 출처: Image #1: Photographer Davide Bartolai, Pan, 2021.
Image #2: Photographer Davide Bartolai, Pan, 2021.
Image #3: Photographer Davide Bartolai, Pan, 2021.
Image #4: Photographer Davide Bartolai, Pan, 2021.
Image #5: Photographer Davide Bartolai, Pan, 2021.