Christian Geistberger의 The R Series 랙 시스템

디자이너 Christian Geistberger의 작품 The R Series 랙 시스템은(는) 매우 권위 있는 2023 A' Design Award 은상의 상업용 기기 디자인 부문에서 탁월한 수상작입니다.

은상업용 기기· 2023

The R Series 랙 시스템

디자이너: Christian Geistberger

클라이언트: RDD design network

상업용 기기 부문 A' Design Award 은상 수상작

55,564

인증된 수상작

#151085 수상 상태 인증하기

A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

The R Series 랙 시스템 소개

R 시리즈는 자동화 계측 기술을 위해 설계된 모듈형 랙 시스템입니다. R 시리즈는 제품군 내에서 상위 및 하위 호환성을 제공합니다. 중앙에 배치된 19인치 랙과 더불어, Rack R90과 Rack R180은 전기 배전반 어셈블리, IT 시스템 또는 이와 유사한 장비를 위해 양측에 각각 하나 또는 두 개의 접근 가능한 설치 공간을 제공합니다. 19인치 코어를 설치 공간과 분리함으로써, 민감한 계측 장비를 일반 전기 기기와 하나의 이동식 시스템 안에 결합할 수 있습니다. 구조체는 경량 알루미늄으로 제작되었습니다.

수상 인정

A' Design Award 은상 소개

The R Series 랙 시스템, 이 작품은 A' Design Award 은상 수상작으로, 최상급이며 아름답고 인상적인 디자인에 수여되는 비범하게 권위 있는 인정입니다. 은상 수상작은 대단히 뛰어나고 매우 창의적인 작품으로, 디자이너의 탁월한 전문 지식, 재능, 통찰력을 보여 줍니다. The R Series 랙 시스템, 이 작품은 훌륭한 대표작으로서 매우 전문적이고 깊이 있게 혁신적일 것으로 기대됩니다. 이 은상 수상 디자인은 예술, 과학, 디자인, 기술의 경계를 넓히는 데 이바지하는 주목할 만하고 찬사를 받는 발명품입니다. The R Series 랙 시스템, 이 작품은 모두가 부러워하는 창작물로서 욕망을 일깨우고 긍정적인 감정을 불러오며 경탄과 경이로움을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The PROFECTRONICS rack design family is characterized by upward and downward compatibility within the product family.
In addition to the centered 19 inch rack system, the Rack R90 and Rack R180 also have one or two easily accessible installation spaces on each side.
These provide space for electrical switchgear assemblies, IT systems or similar.
Due to the design separation of the 19 inch core and the installation spaces, highly sensitive measuring devices can be combined with conventional electrical devices and all this in a single mobile system.
치수 및 패키징: Rack R180 (BxHxT): (850 x 1800 x 650) mm
Rack R90 (BxHxT): (850 x 900 x 650) mm
Rack R30 (BxHxT): (500 x 300 x 400) mm
생산 기술: The selection of materials is in line with our corporate philosophy

Engineered in Austria.
Produced in Europe.
Delivered worldwide.

The entire rack system was manufactured in lightweight aluminum. Lower weight and therefore reduced transport costs and Co2 savings justify higher manufacturing costs. Butt corners and surfaces are made of recycled PET-HD materials. The aluminum construction and the recycled plastic give the rack family a certain "heavy-duty" look, which, however, stands out as a fine mechanical and well thought-out construction element upon closer inspection or detailed solutions.
디자인 과제: The most difficult part of the design was ensuring functionality. For example, different areas in the rack must be hermetically sealed, shield electromagnetic radiation, waterproof, lightweight and at the same time ergonomic for all-day use. Use of special or composite materials at the expense of recyclability was out of the question.
연구: Starting with old-fashioned but proven instruments, the first prototypes were sketched on paper and then manufactured in foam. When the first contours were in line with functionality and ergonomics, Solidworks was used as the CAD programme. From this point on, there was a balance between creative freedom and feasibility. The research was quite emotional. Especially in the research-intensive medical sector, design is quite popular. In the conventional production sector, on the other hand, design is often regarded as secondary. Accordingly, there are few competing products in this sector. This is certainly an advantage, as design is seen as a benchmark for future products.
영감: Product development, manufacturing and environmental technology are just three of the wide range of applications for automated measurement technology.
This results in a constantly growing technical sub-sector in a world with an increasing degree of automation.
To place the instruments of an automated system, sustainably and with a demand for design and technology, that is the goal and field of application of the product family of PROFECTRONICS, which has specialized in measurement automation since 2016.
프로젝트 기간: The project was launched in March 2021 in Linz, Austria. Starting with a single product the family was designed and developed step by step by the needs of our costumers.
운영 흐름: The R Series family is the base of test systems used in laboratories, in development departments, but also as end-of-line test systems for production lines.
The design of this equipment line focuses on functionality, simple operation and is conceived as a modular construction kit. Clear compact design and durability are the design criteria, the aim of which is based on "form follows emotional function". With a few simple steps, the respective modules can be placed or exchanged in the frame construction.
The same applies to the assembly and disassembly of the cladding parts, which facilitate service and maintenance work.
팀원: Christian Geistberger, Profectronics GmBH
Rainer Atzlinger, RDD Design