디자이너 Dave Colliver의 작품 Possibilities 볼펜은(는) 매우 권위 있는 2017 A' Design Award 철상의 미술 및 문구 용품 디자인 부문에서 탁월한 수상작입니다.

철미술 용품· 2017

Possibilities 볼펜

디자이너: Dave Colliver

클라이언트: If

미술 용품 부문 A' Design Award 철상 수상작

25,521

인증된 수상작

#54513 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Possibilities 볼펜 소개

아이디어를 종이에 담는 촉각 적 연결을 능가하는 것은 없습니다. 그것은 당신이 자부심을 가질 수있는 것입니다. 전통을 존중하는 "If"의 Possibilities Ballpoint Pen은 깃펜과 만년필에서 요소를 빌려 쓰기의 즐거움을 다시 연결하는 반면 표준 G2 볼펜 리필은 현대 쓰기의 편리함과 다양성을 제공합니다. . 이 제품의 디자인은 수축 방지 건조 캡, 스퀴즈 그립 활성화, 클릭 투 핏 리필 교체 및 평생 지속되는 스타일, 실용성 및 즐거움을위한 2 단계 포켓 클립을 원활하게 연결하는 데 중점을 둡니다.

수상 인정

A' Design Award 철상 소개

Possibilities 볼펜, 이 작품은 A' Design Award 철상 수상작으로, 잘 디자인된 창작물에 기대되는 전문적·산업적 요건을 충족하는 좋은 디자인에 수여되는 권위 있는 인정입니다. 철상 수상작은 창작자의 뛰어난 기술, 높은 전문성, 전문가다운 이해, 창의적 역량을 보여 줍니다. Possibilities 볼펜, 이 작품은 높이 평가받고 감탄과 사랑을 받는 창작물로서 실용적이고 혁신적일 것으로 기대됩니다. 이 철상 수상 디자인은 업계 모범 사례를 통합하며 노하우와 재능으로 연결된 유능한 기술적 특성을 갖추고 있습니다. Possibilities 볼펜, 이 작품은 철저함으로 존중받으며 삶의 질을 개선하여 세상을 더 나은 곳으로 만들도록 디자인되었습니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Your pen is an expression of who you are. The Possibilities Ballpoint Pen from "If" shows that you are a thoughtful influencer far from being pretentious with: Understated but distinctive looks - An integrated retracting cover to protect the writing tip from drying out - Single motion activation, squeeze the grip and write - A pocket clip that closes so you won't put it away when in writing mode - Quick click-to-fit refill replacement with no disassembly needed - Durability enough to use every day, forever.
치수 및 패키징: Length: 150mm
Diameter: 12.7mm
Weight: 25grams
Balance: central
Refill: universal standard G2
태그: pen, ballpoint, writing, luxury, office, stationery, gift
생산 기술: Internal components are produced from engineering grade injection molded plastics (Polycarbonate and Acetal) while the barrel is metal injection molded in either 316 stainless steel or Ti64 titanium.
디자인 과제: Selection of quality manufacturers enabled the functionality and quality from the design to be realized however this created a new challenge in the prototyping phase.

The best rapid prototyping technology available was sufficient to prove the functionality but not to reproduce the desired tight tolerances.

The upshot of this is the verification that the finished product will continue to function as intended even after years of use and abuse.
연구: Many years of experience in manufacturing, applying the principles of Lean and Continuous Improvement, have demonstrated the need to address a key set of objectives from the very beginning.

Selection of core values, business model, target market and product has been deliberately focused. Design intent has been rigorously adhered to throughout.

Careful application of the Eliminate, Combine, Rearrange and Simplify approach has helped guarantee that the outcome combines quality and affordability.
영감: I have some nice pens in my collection, some sought out and some given to me as thank you gifts. They mean quite a lot to me.

Most though, have scratches, jammed mechanisms, missing parts or broken pocket clips so they have been relegated to being unused mementos rather than daily reminders of achievements, values and aspirations.

I wanted to share my dream for a unique pen, exceptional in its modern styling, function and robust quality that can be used with pride every day, forever.
프로젝트 기간: The project, based in Adelaide South Australia, started in July 2011 and has recently reached the point of commercial readiness. It has been functionally tested and proven and is ready now to be manufactured.
운영 흐름: The unique retracting cover that prevents ink from drying out services the growing market desire for gel ink refills that need greater protection from airflow where other pens don’t.

Activation of the pen for writing is one simple intuitive step. Hold the pen as if you are writing and squeeze the grip lightly – the protective cap will retract and the pen is ready to write.

Replacement of the refill requires no disassembly of the barrel. The refill is simply held in place by inserting and pressing the tip upwards to clip into place – press down and slide out to remove it.
특허: Registered Design No. AU 367804. 2016. Australia
The Registered Design belongs to Dave Colliver, 2016.
팀원: Dave Colliver
이미지 출처: Image #1 : Creator Katie Kung, Aesthetic form, 2017
Image #2 : Creator Katie Kung, Active and inactive, 2017
Image #3 : Creator Katie Kung, Pocket clip and button, 2017
Image #4 : Creator Katie Kung, Internals, 2017
Image #5 : Photographer Dave Colliver, Refill replacement, 2017