Javad Negin and Melika Etemadi의 Nature 다이아몬드 귀걸이

디자이너 Javad Negin and Melika Etemadi의 작품 Nature 다이아몬드 귀걸이은(는) 매우 권위 있는 2020 A' Design Award 동상의 주얼리 디자인 부문에서 탁월한 수상작입니다.

동주얼리· 2020

Nature 다이아몬드 귀걸이

디자이너: Javad Negin and Melika Etemadi

클라이언트: Javad Negin

주얼리 부문 A' Design Award 동상 수상작

16,489

인증된 수상작

#89081 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Nature 다이아몬드 귀걸이 소개

이 형태의 영감의 원천은 자연입니다. 자연은 매우 광대하고 그 자체로 관념과 관련하여 다양한 요소를 가지고 있습니다. 오래 전부터 번식과 초목이이 사실을 설명해 왔습니다. 영원한 자연 속에서 모든 것은 무한하며 무한의 시작을 낳는다.이 형태는 의미있는 세부 사항과 통합 된 반면, 각 부분은 이야기를 전달하고, 서로 통합 된 모든 구성 요소는 귀걸이 모양으로 이야기를 표현한다.

수상 인정

A' Design Award 동상 소개

Nature 다이아몬드 귀걸이, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Nature 다이아몬드 귀걸이, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Nature 다이아몬드 귀걸이, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The overall form of these earrings is very eye-pleasing and has soft curves which is a representative of growth. Unlike other earrings pieces, this model can be divided into two halves, where one of the pieces goes behind the ear and the other one is placed in front of the earlobe. The fact is there are known and unknown facts in nature by human beings is shown perfectly by one piece where it hides behind the ear and one that is placed in front of earlobe.
치수 및 패키징: The earrings have a height of 44 * 29 mm and the thickness of the lowest part of the design is 1.8 mm whereas the top part is 2.8 mm.
태그: Diamond-earring, Jewelry, Earring, Nature, Garnet, Persian, Gemcolors, Gemstonejewelry
생산 기술: Parts of this earring have been designed in 3D using rhino and matrix software and 3D printing technology with direct casting. The number of stones used is 90 stones. Of these 90 fragments, 54 are diamonds,36 are Garnet Rhodolite raspberries and a Garnet Rhodolite in size of 6.8 mm and weighing about one carat is used.
디자인 과제: The challenge has been the process of manual design and its three-dimensional execution, Designing a single gem with 8 prongs with the notion of infinity has been the most challenging part of the process.
연구: There have been plenty of situations in which the design field has been inspired by nature. This research is the result of the designers’ amazement and excitement by nature and how it reveals new possibilities. When the word design is mentioned what comes to mind is the word description. Here in this design, the main goal was to demonstrate growth in nature despite it being called positive or negative. In order to reach growth, one has to go through hardship which is shown with gem’s culet and once this cycle is complete the earrings finish with round gems as it shows how at the end of any hardship comes the silver lining. This form mystery which is an inseparable part of nature is also shown perfectly by one piece wherefore it goes behind the earlobe and another one comes in front of it.
영감: This design has been inspired by nature and how using it in various forms is trendy in today’s world. Nature can trigger one’s creativity. Throughout history, nature came up with many improving solutions for the challenges it has faced. Every living organism has to go through hardship in order to pass through the growth process. These earrings have been inspired by how going through all the positive and negative aspects of life can lead to growth. Positive features are shown with round gems and negative ones are shown with sharp gems. It can simply be seen how in the end things evolve in a way which positive takes over negative.
프로젝트 기간: Feb 2018 – Sep 2019 / Tehran, Iran
운영 흐름: The team has been interested in the nature concepts for jewelry design since its initiation and has started writing scenarios based on this fact and brainstorming ideas with respect to this subject. Then an idea is selected as the chosen design of all the concepts. After the concept design phase, the manual design is initiated and the final design enters the technical drawing stage of the product, using rhino and matrix software to make the drawing 3D, and afterward for Its 3D printing wax and also direct casting with 18-carat Rose gold is prepared and the final stage which is diamond setting.
팀원: Melika Etemadi
Javad Negin
이미지 출처: All Photos rendered by Javad Negin
Video: Melika Etemadi