Michael Budig and Kenneth Tracy의 Carbon Activated Timber Bench 벤치

디자이너 Michael Budig and Kenneth Tracy의 작품 Carbon Activated Timber Bench 벤치은(는) 매우 권위 있는 2020 A' Design Award 동상의 지속 가능한 제품, 프로젝트 및 그린 디자인 부문에서 탁월한 수상작입니다.

동지속 가능한 제품· 2020

Carbon Activated Timber Bench 벤치

디자이너: Michael Budig and Kenneth Tracy

클라이언트: Singapore University of Technology and Design

지속 가능한 제품 부문 A' Design Award 동상 수상작

23,098

인증된 수상작

#89216 수상 상태 인증하기

A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Carbon Activated Timber Bench 벤치 소개

카본 액티베이티드 팀버 벤치(Carbon Activated Timber Bench)는 공공장소를 위해 디자인되었으며 재활용 목재 판재로 제작되었다. 이 작품은 무게와 안정성에 대한 통념에 도전한다. 목재 판재의 볼륨은 겉보기에 육중한 덩어리처럼 보이지만, 실제로는 느슨하게 연결되어 불안정한 상태에 놓여 있다. 가느다란 탄소섬유 실이 이 육중한 덩어리들을 하나로 묶어 안정성을 부여한다. 또한 이 탄소섬유는 덩어리를 보강하여 목재 판재에 강도까지 더해준다.

수상 인정

A' Design Award 동상 소개

Carbon Activated Timber Bench 벤치, 이 작품은 A' Design Award 동상 수상작으로, 창의성, 독창성, 영민함으로 돋보이는 뛰어난 디자인에 수여되는 높은 권위의 인정입니다. 동상 수상작은 충분히 숙련되고 인상적으로 창의적인 작품으로, 디자이너의 폭넓은 경험, 상상력, 기지를 입증합니다. Carbon Activated Timber Bench 벤치, 이 작품은 높이 평가받고 감탄과 사랑을 받는 사물로서 두드러지게 전문적이고 혁신적일 것으로 기대됩니다. 이 동상 수상 디자인은 예술, 과학, 디자인, 기술의 모범 사례를 담고 있으며 세부에 대한 주의로 훌륭합니다. Carbon Activated Timber Bench 벤치, 이 작품은 필요를 훌륭하게 충족하고 욕망에 닿으며 감정을 매료하고 호기심을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: The bench uses reclaimed wood planks that through their re-application continue to store carbon, since the living trees absorb CO2 from the environment. The re-use of the wood hence contributes to a positive ecological balance. Carbon is re-combined with the wood in a different state, as minimal amounts of high tech fibres that are strategically placed to enhance the capacity of the wood planks.
치수 및 패키징: Dimensions: 3000 x 830 x 400 mm
Volume: 0.1736 m3
Mass: 128 kg of reclaimed hardwood from outdoor deckings
Carbon fibers, total mass: 0.623 kg (around 800m of 12k carbon fibre tow)
태그: Reclaimed wood, carbon fibres, robotic milling, traditional crafts
생산 기술: The bench reflects craftsmanship in a contemporary context, where computational design and fabrication have become state of the art. After stacking reclaimed wood planks into solid blocks, an industrial robotic arm mills the blocks into their final geometries with paths for the subsequent reiforcement with fibres. The reclaimed wood planks store carbon and contribute to a positive ecological balance, whereas carbon is re-combined as minimal amounts of high tech fibres, strategically placed to enhance the capacity of the wood planks.
디자인 과제: Reclaimed wood simultaneously diverts waste and reduces the energy by forgoing the effort needed to obtain virgin materials. The finishing and fabrication contribute to making a durable, robust piece of furniture sequestering carbon for longer and reducing the need for replacements. Finally augmenting the performance of wood beyond its inherent structural capacity increases the potential range of use so it can be used differently for both industrial design and architecture.
연구: The bench design highlights the expertise present in large-scale furniture carpentry in a combination of experienced labor with new forms of craft, digital calibration and robotic fabrication. By augmenting the reclaimed wood with carbon fibers, the project proves that small amounts of high-performance materials can be used alongside carbon-negative wood elements. This new design direction increases productivity and sustainability through the use of new design and manufacturing technologies.
영감: Juxtaposing old, weathered hardwood with precise smooth carving and high-tech carbon fiber gives the piece a unique character. This novel expression fuses high tech carving, patina, natural wood grain, digitally designed weaving patterns and precise manufacturing. This points towards an optimized, calibrated future of sustainable design and recalls vernacular traditions of textile and wood construction. Lashing, wood joinery and timber frames act as both cultural and technological precedents.
프로젝트 기간: Conversations started in late December 2016, and the design was completed in November 2018 and installed on the grounds of Mapletree Business City 2, Singapore
운영 흐름: Initiated by the opportunity to reuse wood decking boards the project leverages high performance materials and new techniques to renew the old materials and create a sustaining piece of furniture. An elongated pattern of tightly wound carbon fiber strands rest within robotically carved groves to hold the massive stack of blocks together. Precise, continuous curvature combined with tapered edges form a comfortable low-profile object that looks lightweight despite being 140kg
팀원: Principal Designer: Michael Budig
Principal Designer: Kenneth Tracy
Sachin Gupta
Kerine Kua
Dhileep Kumar
Lee Le Xiu Jean
Melissa Lee Wen Hui
Seah Jia Neng
Daniel Yong Kaijie
Robotic Fabricator: Singapore Composite Cluster
Wood Fabricator: Hon Nam Lee
이미지 출처: Michael Budig and Kenneth Tracy, Singapore University of Technology and Design