디자이너 Davide Diliberto의 작품 Robot 도어 핸들은(는) 매우 권위 있는 2020 A' Design Award 은상의 가구 액세서리, 하드웨어 및 소재 디자인 부문에서 탁월한 수상작입니다.

은가구 액세서리· 2020

Robot 도어 핸들

디자이너: Davide Diliberto

클라이언트: Ento

가구 액세서리 부문 A' Design Award 은상 수상작

43,823

인증된 수상작

#92482 수상 상태 인증하기

사이트 방문 A' Design Award에서 보기 보도 자료 수상 배지

색상

디자인

Robot 도어 핸들 소개

로봇(Robot)은 하나의 작은 건축물로 구상된 도어 핸들이다. 그 형태는 단순한 단면에서 출발하여, 면들이 뻗어 나가고 회전하면서 손바닥과 엄지에 알맞은 그립감을 제공한다. 상단에서 수평면이 돌출되어 손바닥으로 핸들을 눌러 내릴 수 있으며, 주된 면은 두 방향으로 확장되어 엄지가 앞으로 밀도록 유도한다. 각진 형태와 날카로운 모서리는 핸들이 건축 공간과 자연스럽게 어우러지도록 한다. 핸들은 황동 단일 부재로 제작되며, 폴리시드 크롬, 새틴 크롬, 새틴 그라파이트, 무광 블랙 에나멜 마감으로 제공된다.

수상 인정

A' Design Award 은상 소개

Robot 도어 핸들, 이 작품은 A' Design Award 은상 수상작으로, 최상급이며 아름답고 인상적인 디자인에 수여되는 비범하게 권위 있는 인정입니다. 은상 수상작은 대단히 뛰어나고 매우 창의적인 작품으로, 디자이너의 탁월한 전문 지식, 재능, 통찰력을 보여 줍니다. Robot 도어 핸들, 이 작품은 훌륭한 대표작으로서 매우 전문적이고 깊이 있게 혁신적일 것으로 기대됩니다. 이 은상 수상 디자인은 예술, 과학, 디자인, 기술의 경계를 넓히는 데 이바지하는 주목할 만하고 찬사를 받는 발명품입니다. Robot 도어 핸들, 이 작품은 모두가 부러워하는 창작물로서 욕망을 일깨우고 긍정적인 감정을 불러오며 경탄과 경이로움을 불러일으킵니다.

디자인 비하인드

프레스 킷

디자이너가 제공한 크레딧, 팀원 및 기술 세부 사항.

고유 특성: Robot is a family of door handles inspired by the concept of transformation. Its shape reminds a regular profile from which surfaces extend and rotate to ensure the right grip and comfort for the palm and the thumb. Squared shape, sharp corners and three dimensional planes made the handle visually fuse together with the architectural environment. It is also intended as an extended range with all the related products and accessories obtained by just three moulds.
치수 및 패키징: Size of the handle without any rose or plate, width 133 mm, depth 49 mm, height 26 mm.
Size with standard round rose, width 141 mm, depth 60 mm, height 50 mm.
태그: handle, robot, transformation, grip, surface
생산 기술: The door handle is one piece of brass, finished in polished chrome, satin chrome or high performance satin graphite. It is also available in a special matt black enamel coating that ensures the same demanding performances of the faucet industry. It features special 6 mm thick rose and escutcheon.
디자인 과제: The moulded raw piece needs to be finished by tool grinding and polishing. Due to the geometric shape, a particular care is required in order to keep regular planes, sharp edges and the original design. All these operations have to be manually executed, especially for the satin finishes where the grinding lines are visible and must be perfectly oriented. Is one of the most complex door handles of the market.
연구: The brand philosophy is based on the door handle as a complementary part of the whole project. In order to design a product which embodied such a concept, I wanted to give it an architectural look by flat surfaces and squared shapes. I had to verify if multiple planes and sharp edges were feasible. This handle has been unveiled as a prototype in 2018, so together with the company, I made a market research to test the best expected length of the grip for the final production version. Sales managers suggested to slightly increase the overall length about 5 mm compared to the first prototype.
영감: A door handle is usually a piece of metal without special features or moving parts. I figured out a technological tool shaped with a different idea of ergonomics, inspired by robots and the way they change their shape to better operate specific tasks. As a micro architecture, Robot handle ideally extends and rotates surfaces in order to offer the right grip for the palm to push it down and for the thumb to push it forward. This way material is used just where it is needed, with weight and size reduction.
프로젝트 기간: The first concept has been shown to the company based in Brianza on November 2017. Then a refined prototype was unveiled at 2018 Milan Design Week, with all the range of related accessories. Following some suggestions from clients, the production version is slightly longer and has been unveiled at 2019 Milan Design Week and permanently placed into the Archiproducts Milano headquarters, in Via Tortona.
운영 흐름: The shape is intended to suggest the most efficient way to operate it. An horizontal plane protrudes from the top to give the palm the right surface to push down the handle; in the same way, the main surface extends in two directions to visually invite the thumb to push forward. Even if the overall design is squared, the body is thick enough and the rear is rounded to ensure a comfortable grab.
이미지 출처: Image #1 : Photographer Davide Diliberto, Robot door handle on a door, 2020.
Image #2 : Photographer Davide Diliberto, Robot door handle polished chrome, 2020.
Image #3 : Photographer Davide Diliberto, Robot pull handle polished chrome, 2020.
Image #4 : Photographer Davide Diliberto, Robot Door Handle on a door, 2020.
Image #5 : Creator Davide Diliberto, Robot door handle photomontage, 2020.
Video Credits: Creator Davide Diliberto, Robot door handle concept, 2020.