Arch Kورسی، کورسی بێ پشتگیر by Edvard Glazebrook

Arch Kورسی، کورسی بێ پشتگیر by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 Xelata A' Design Award a Tuncîn in Dîzayna Mobîlyayê Competition Category.

TuncMobîlya· 2021

Arch Kورسی، کورسی بێ پشتگیر

by Edvard Glazebrook

Xelata A' Design Award a Tuncîn Winner in Mobîlya Category

11,029

Verified Award Winner

Verify Award Status for #106853

View at A' Design Award Press Release Award Badge

Colors

The Design

About Arch Kورسی، کورسی بێ پشتگیر

نووسینی پەرتووک: ئارچ کورسییەک و دانیشتنگایەکی بێ پشتگیرە کە لە داری چاو دروستکراوە، هەڵکۆڵراو و بە ڕەنگی ڕەشی لاکردراو. دیزاینەکە بنەمای لەسەر شێواز و فۆرمی سادە و دووبارەبووەوە دانراوە، کە ڕازاوەیی وەکو یەک و لۆژیکی بە کەلوپەلەکە دەبەخشێت. پێنج تاقی یەکسان پێ و پشتگیری کورسییەکە پێک دەهێنن، لەکاتێکدا دانیشتنگای بێ پشتگیر لە سێ نیوتاق پێکهاتووە کە لە ناوەڕاستدا کۆدەبنەوە. هەموو بەشەکان لە تەختەیەکی داری چاو بە ئامێری CNC router بڕدراون، پاشان بە پەیوەندی کرداری چوبی و بەسڵدراوی بەیەکەوە بەسترانەوە. تاقەکان لاوازترین خاڵەکانی کەلوپەلەکە بەهێز دەکەن.

The Recognition

About the Xelata A' Design Award a Tuncîn

Arch Kورسی، کورسی بێ پشتگیر xelatgirê Xelata A' Design Award a Tuncîn e, nasîneke pir bi prestîj ku ji sêwiranên berbiçav ên bi afirînerî, jêhatîbûn û zîrekiyê têne cudakirin re tê dayîn. Xelatgirên Tuncînê karên bi têra xwe jêhatî û bi awayekî balkêş afirîner in, yên ku ezmûna fireh, xeyal û çareserkirina sêwiranerên xwe piştrast dikin. Tê hêvîkirin ku Arch Kورسی، کورسی بێ پشتگیر tiştekî pir hatiye rêzgirtin, sitayişkirin û delal be, bi awayekî berbiçav pîşekar û nûjen. Ev sêwirana bi Tuncînê serketî pratîkên çêtirîn ên huner, zanist, sêwiran û teknolojiyê digire nav xwe û ji bo baldariya li hûrgiliyan hêja ye. Arch Kورسی، کورسی بێ پشتگیر pêdiviyan bi rengekî xweş tîne cih, destê xwe dide daxwazan, hestan dihejîne û meraqê dikişîne.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensions & Packaging: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tags: Wood, Chair, Stool, Pine wood, Arches, Curve
Production Technology: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Design Challenge: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Research: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiration: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Project Duration: The project started in march 2020 - and finished in late May 2020.
Operation Flow: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patents: Copyrights belong to Edvard Glazebrook, 2020
Team Members: Edvard Glazebrook