دیزاینی Dond Maseya Nizm لەلایەن Jinyang Koo خەڵاتگرێکی بەناوبانگی خەڵاتی شکۆمەندی 2020 Xelata A' Design Award a Tuncîn لە پۆلی پێشبڕکێی Dîzayna Mobîlyayê.

TuncMobîlya· 2020

Dond Maseya Nizm

لەلایەن Jinyang Koo

کڕیار: Wuui

خەڵاتگری Xelata A' Design Award a Tuncîn لە پۆلی Mobîlya

17,687

خەڵاتگری پشتڕاستکراو

پشتڕاستکردنەوەی باری خەڵات بۆ #88288

سەردانی ماڵپەڕ بینین لە A' Design Award ڕاگەیاندنی چاپەمەنی نیشانەی خەڵات

ڕەنگەکان

دیزاینەکە

دەربارەی Dond Maseya Nizm

Dîroka sêwirana Dond-ê hêsan e ku hêsan e pirjimar. Parçeyên tevlîhevkirinê yên hêsan bi karanîna Printerek 3D ve dike, û sêwirana perçeyên kêmtirîn ji bo ku xerîdar bi hêsanî masûmê bicivîne yan jî belav bibe da ku di dema veguhestinê de bigire. Armanca sêwiraner ev bû ku Dond beşdarî hewceyê rojane yê xerîdar bibe da ku ji bo her demek li hundur û derveyî her kêliyek jiyanek hêsantir bijî. Dond rêbazek sêwirana rasterast bikar tîne wekî rûyê jorîn bi lingan ve neyê girêdan û bi hêsanî tête rakirin ku wekî trayek bikar bîne.

پێناسەکردن

دەربارەی Xelata A' Design Award a Tuncîn

Dond Maseya Nizm xelatgirê Xelata A' Design Award a Tuncîn e, nasîneke pir bi prestîj ku ji sêwiranên berbiçav ên bi afirînerî, jêhatîbûn û zîrekiyê têne cudakirin re tê dayîn. Xelatgirên Tuncînê karên bi têra xwe jêhatî û bi awayekî balkêş afirîner in, yên ku ezmûna fireh, xeyal û çareserkirina sêwiranerên xwe piştrast dikin. Tê hêvîkirin ku Dond Maseya Nizm tiştekî pir hatiye rêzgirtin, sitayişkirin û delal be, bi awayekî berbiçav pîşekar û nûjen. Ev sêwirana bi Tuncînê serketî pratîkên çêtirîn ên huner, zanist, sêwiran û teknolojiyê digire nav xwe û ji bo baldariya li hûrgiliyan hêja ye. Dond Maseya Nizm pêdiviyan bi rengekî xweş tîne cih, destê xwe dide daxwazan, hestan dihejîne û meraqê dikişîne.

لە پشت دیزاینەوە

کیتی چاپەمەنی

باوەڕپێکراوەکان، ئەندامانی تیم و وردەکاری تەکنیکی کە لەلایەن دیزاینەرەوە پێشکەش کراون.

تایبەتمەندییە تایبەتەکان: Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
قەبارە و پاکێج: Top: 330mmx330mmx15mm
Overall Height: 415mm
تاگەکان: Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
تەکنەلۆژیای بەرهەمهێنان: The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
هەڵەنگاندنی دیزاین: Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
توێژینەوە: During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
ئیلهام: The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
ماوەی پڕۆژە: The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
ڕێڕەوی کارکردن: Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
ئەندامانی تیم: JINYANG KOO