The Flett Чатыр герметизациялоочу тасма (флешинг) by Scott Flett is a highly esteemed winner of the very prestigious 2023 A' Design Award Темир байгеси in 3D Басып чыгарылган Формалар жана Продукттар Дизайны Competition Category.
Темир3D Басып чыгаруу· 2023
The Flett Чатыр герметизациялоочу тасма (флешинг)
by Scott Flett
Client: Scott Flett Architecture Workshop.
A' Design Award Темир байгеси Winner in 3D Басып чыгаруу Category
Verified Award Winner
Verify Award Status for #141650The Design
About The Flett Чатыр герметизациялоочу тасма (флешинг)
Flett – тик тигилген муюштары бар архитектуралык капталуучу материалдар үчүн иштелип чыккан чатыр герметизациялоочу тасма (флешинг). Флешинг ASA пластигинен 3D басып чыгаруу жолу менен даярдалат, өлчөмү 265х50х100 миллиметр, калыңдыгы 2 миллиметр түзөт. Форма бир капталуучу барактын алдынан өтөт, багыттын өзгөрүшүнө мүмкүнчүлүк берет, андан кийин кийинки барактын үстүнөн жабат. Бөлүктүн профили жана түсү чатыр материалынын профили менен түсүнө ылайыкташтырылган, ал эми материал термикалык туруктуу, УК нурларына туруштук берет жана уулуу эмес. Флешингди жалпы курулуш адистери ырааттуулук менен орнотушу мүмкүн, максаты – чатырдын татаал муюштарындагы агуулардын санын азайтуу.
The Recognition
About the A' Design Award Темир байгеси
The Flett Чатыр герметизациялоочу тасма (флешинг) – A' Design Award Темир байгесинин жеңүүчүсү, жакшы иштелип чыккан чыгармалардан күтүлгөн кесиптик жана өнөр жайлык талаптарга жооп берген жакшы дизайндарга берилген бедели бар таануу. Темир жеңүүчүлөр авторлорунун зор чеберчилигин, жогорку адистешүүсүн, адистик түшүнүгүн жана чыгармачыл жөндөмүн көрсөтөт. The Flett Чатыр герметизациялоочу тасма (флешинг) жогору бааланган, суктанууга жана сүйүүгө татыган, практикалык жана жаңычыл чыгарма болот деп күтүлөт. Бул Темир байгени жеңген дизайн тармактын мыкты практикасын бириктирет жана билим менен талант байланышкан жөндөмдүү техникалык мүнөздөмөлөргө ээ. The Flett Чатыр герметизациялоочу тасма (флешинг) тыкандыгы үчүн урмат тартат жана жашоонун сапатын жакшыртып, дүйнөнү жакшы жерге айландырууга жардам берүү үчүн иштелип чыккан.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The Flett Flashing is the world’s first 3D printed roof flashing. 3D printing allows the flashing to perfectly match any specified roofing profile and colour and permits junctions between roofing sheets of different pitches to be installed without difficulty. This invention makes architectural cladding quicker, easier and cheaper to install and represents a step change for the roofing and cladding industry.
- Dimensions & Packaging
- 265mm x 50mm x 100mm
2mm thick ASA plastic, color matched to roofing profile. - Tags
- roof, flashing, roof flashing, 3d print, 3d printing, additive forming
- Production Technology
- The Flett flashing is produced with 3d printing or additive forming.
I designed a mold that under-laps the sectional profile of standing seam cladding sheet, permits any change in direction and then overlaps the sectional profile of an subsequent sheet.
I developed an additive manufacturing process that consistently produces a robust product that is thermally stable, UV stable, nontoxic and color matched to the roofing sheet.
I developed an installation method that allows the sheets to be installed in sequence and quickly. The installed product looks clean, simple and aesthetically consistent. - Design Challenge
- Architectural Cladding is installed by specialist trade personnel. This generally requires decades of experience, is time consuming and as a consequent is expensive. This often leads to architectural cladding being priced out of commerciality. With the Flett Flashing, this can be installed by carpenters, builders or other trades without the requirement of a specialist trade.
- Research
- The Flett Flashing aspires to catalyse a global rethink of roof design.
The world has only modestly changed the way it designs roofs since the invention of corrugated iron in 1829.
Roofs are at the very essence of shelter. Our shelter, and built environment as a whole, needs to respond to its environment.
This is particularly applicable in Australia, where the homes are still often styled on European and American homes. Australia deserves to have a roof design that suits its conditions.
The Flett Flashing is this Australian design. It not only gives greater creative options to architects and better solutions for builders but it also responds to our unique environmental challenges, and way of life.
Everyone knows someone whose roof has leaked. It is one of the most common building defects and even minor damage causes an immense financial burden. The Flett Flashing aims to prevent this problem. - Inspiration
- Traditional Metal Roofing or Architectural Cladding continues to be an enduring method of cladding throughout the world. One of the design challenges of using architectural cladding is how to resolve junctions. The issue is that each standing seam panel is asymmetrical and must be installed in sequence. There is currently no product on the market for architectural cladding that facilitates a quick change in direction. This has been done by hand for hundreds of years. The design challenge is to create a durable and aesthetically pleasing flashing suitable for standing seam cladding that is quick and easy to install.
- Project Duration
- The project started on January 2017 and is ongoing.
The Flett Flashing has been installed on a house that I built in Hobart, Tasmania.
The Flett flashing is a derivative of 4 years of relentless design iterations and constant printing. The form is the result of over 1000 days of improvement.
I am continuing the commercialisation of this invention in Sydney at the UNSW start up hub: 'Founders'. - Operation Flow
- I hope to inspire the world to improve roof design.
I am the first architect in the world to have designed a 3d printed roof flashing. I am also the first builder in the world to have manufactured and installed a 3d printed roof flashing.
I have shown that architects can have more design options and builders have more solutions. I have demonstrated that 3d printing belongs in the collective site toolbox.
Australia, and the world, has a problem with leaking roofs. Difficult junctions and poor roof design are the leading causes of roof leaks. My design addresses this problem.
The Flett Flashing can be tailored to suit multiple profiles, responding to design requirements of its local environment, enabling application to a wide range of locations. - Patents
- Patented. Patent No 2020314005. Year 2020. Australia
Trademark: 2022. Scott Flett Architecture Workshop
Flett: Australian Trade Mark Registration No. 2217228
The Flett Flashing: Registered Design 201915882
Australian Patent: 2020314005
PCT/AU2020/050728 - Team Members
- Scott Flett
- Image Credits
- Video Credits: Chris Shurman and Charles Whittington
Image Credits: Chris Shurman and Mark Lobo
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
