Arch Stull, Stull ouni Réckenlehn by Edvard Glazebrook

Arch Stull, Stull ouni Réckenlehn by Edvard Glazebrook is a highly esteemed winner of the very prestigious 2021 A' Design Award an Bronze in Miwwelendesign Competition Category.

BronzeMiwwelen· 2021

Arch Stull, Stull ouni Réckenlehn

by Edvard Glazebrook

A' Design Award an Bronze Winner in Miwwelen Category

11,029

Verified Award Winner

Verify Award Status for #106853

View at A' Design Award Press Release Award Badge

Colors

The Design

About Arch Stull, Stull ouni Réckenlehn

Arch ass e Stull an eng Sitzbank ouni Réckenlehn aus geschnëtztem a schwaarz gebeiztem laminéiertem Pinneholz. D'Design baséiert op einfachen a widderhuelende Formen a Gestalten, déi dem Miwwel en homogenen a logeschen Ausdrock ginn. Fënnef identesch Bögen bilden d'Been an d'Réckenlehn vum Stull, wärend d'Sitzbank ouni Réckenlehn aus dräi hallwe Bögen besteet, déi sech an der Mëtt treffen. All Deeler ginn aus enger laminéierter Holzplack mat engem CNC-Fraiser geschnidden, duerno mat Holzdübel geklieft a verbonnen. D'Kurven verstäerken de Miwwel op senge schwaachste Punkten.

The Recognition

About the A' Design Award an Bronze

Arch Stull, Stull ouni Réckenlehn ass e Gewënner vum A' Design Award an Bronze, enger héich prestigiéiser Unerkennung, déi un erausragend Designe vergi gëtt, déi sech duerch Kreativitéit, Erfindungsgab a Schlauheet ausgezeechnen. Bronze-Gewënner si voll Fäegkeet a opfälleg kreativ Wierker, déi déi grouss Erfahrung, d'Fantasie an d'Ressourceréichtum vun hire Designer bestätegen. Et gëtt erwaart, datt Arch Stull, Stull ouni Réckenlehn e héich geschätzt, bewonnert a beléifte Géigestand ass, bemierkenswäert professionell an innovativ. Dëst mam Bronze ausgezeechent Design integréiert déi beschte Praktike vun der Konscht, der Wëssenschaft, vum Design an der Technologie an zeechent sech duerch Opmierksamkeet fir Detailer aus. Arch Stull, Stull ouni Réckenlehn erfëllt Bedierfnesser exzellent, beréiert Wënsch, bezauberet Gefiller an erweckt Neigierecht.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensions & Packaging: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Tags: Wood, Chair, Stool, Pine wood, Arches, Curve
Production Technology: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Design Challenge: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Research: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiration: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Project Duration: The project started in march 2020 - and finished in late May 2020.
Operation Flow: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patents: Copyrights belong to Edvard Glazebrook, 2020
Team Members: Edvard Glazebrook