Vista EY2T Motoriséiert Biometresch Identifikatiounskamera by Chris Dopp & Travis Baldwin is a highly esteemed winner of the very prestigious 2015 A' Design Award an Sëlwer in Sécherheet, Sécherheets- an Iwwerwaachungsprodukter Design Competition Category.
SëlwerSécherheetsprodukter· 2015
Vista EY2T Motoriséiert Biometresch Identifikatiounskamera
by Chris Dopp & Travis Baldwin
Client: Vista Imaging and Crea Inc Design LTD
A' Design Award an Sëlwer Winner in Sécherheetsprodukter Category
- 25,424
- Verified Award Winner
- Verify Award Status for #40052
The Design
About Vista EY2T Motoriséiert Biometresch Identifikatiounskamera
Vista EY2T ass eng motoriséiert biometresch Identifikatiounskamera fir Iris- an Gesiichtserkennung. D'Apparat scannt de Sichtfeld no Gesiichter, dono dréinen d'Motore d'Kamera fir op d'Aen ze zilen. Eng breet Verdeelung vun Infraroud-LEDen an en Autofokus-System erlaben eng Erfaassung an enger Distanz vun 3 bis 6 Fouss, sou datt kee manuellen Zielen néideg ass. Néng Frontsensoren sinn hannert enger eenzeger schwaarzer Uewerfläch vereent, an d'zylindresch Pillenform mat ofgeronnte Enden erschaaft eng roueg an net bedrohlech Form. D'Kamera kann alleng oder mat enger Wandmontage benotzt ginn.
The Recognition
About the A' Design Award an Sëlwer
Vista EY2T Motoriséiert Biometresch Identifikatiounskamera ass e Gewënner vum A' Design Award an Sëlwer, enger aussergewéinlech prestigiéiser Unerkennung, déi un Designe vun der héchster Qualitéit, prächteg a beandrockend vergi gëtt. Sëlwer-Gewënner si bemierkenswäert brillant a ganz kreativ Wierker, déi d'erausragend Expertise, d'Talent an d'Schaarfsënnegkeet vun hire Designer weisen. Et gëtt erwaart, datt Vista EY2T Motoriséiert Biometresch Identifikatiounskamera e wonnerbart, mustergëlteg, bemierkenswäert professionellt an déif innovatiivt Wierk ass. Dëst mam Sëlwer ausgezeechent Design ass eng bemierkenswäert, bewonnert Erfindung, déi dozou bäidréit, d'Grenze vun der Konscht, der Wëssenschaft, vum Design an der Technologie ze erweideren. Vista EY2T Motoriséiert Biometresch Identifikatiounskamera ass eng Kreatioun, op déi vill neidesch sinn, déi Wënsch erweckt, positiv Gefiller bréngt an Erstaunen a Wonner erweckt.
Behind the Design
Press Kit
Credits, team members and technical details provided by the designer.
- Unique Properties
- The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
- Dimensions & Packaging
- The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm. - Tags
- Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
- Production Technology
- The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
- Design Challenge
- The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
- Research
- Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
- Inspiration
- Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
- Project Duration
- The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
- Operation Flow
- When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture. - Team Members
- Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin - Image Credits
- Image #1: Photographer Travis Baldwin / In Office / 2015
Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015
Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015
Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015
Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015
Sponsored
Explore Beyond Designers.org
Discover products, services and opportunities from our advertising partners.
More to Explore
Related Designs
Explore more award-winning designs from the same category, selected by merit.
