ຜົນງານ Sprout ຈັກລິຍານ ໂດຍ JunXiang Cheng and Yi Yang ເປັນຜູ້ຊະນະທີ່ໄດ້ຮັບຄວາມນັບຖືສູງຂອງລາງວັນ 2022 A' Design Award ລະດັບເຫຼັກ ອັນຊົງກຽດໃນໝວດການແຂ່ງຂັນ ການອອກແບບຮູບແບບ ແລະ ຜະລິດຕະພັນພິມ 3 ມິຕິ.
ເຫຼັກການພິມ 3 ມິຕິ· 2022
Sprout ຈັກລິຍານ
ໂດຍ JunXiang Cheng and Yi Yang
ລູກຄ້າ: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
ຜູ້ຊະນະ A' Design Award ລະດັບເຫຼັກ ໃນໝວດ ການພິມ 3 ມິຕິ
ຜູ້ຊະນະລາງວັນທີ່ຢັ້ງຢືນແລ້ວ
ຢັ້ງຢືນສະຖານະລາງວັນສຳລັບ #137286ການອອກແບບ
ກ່ຽວກັບ Sprout ຈັກລິຍານ
Sprout ແມ່ນລົດຖີບທີ່ຜະລິດຂຶ້ນດ້ວຍການພິມສາມມິຕິ. ໂຄງລົດຖືກອອກແບບຮູບຊົງຜ່ານການປັບໃຫ້ເໝາະສົມທາງໂທໂປໂລຢີ (topology optimization) ເຊິ່ງຈັດວາງວັດສະດຸສະເພາະບ່ອນທີ່ຈຳເປັນເທົ່ານັ້ນ ແລະ ຫຼຸດຜ່ອນປະລິມານວັດສະດຸທີ່ໃຊ້ທັງໝົດ. ການວິເຄາະຄວາມກົດດັນແບບສະຖິດດ້ວຍວິທີໄຟໄນເອເລເມັນ (finite element method) ຊ່ວຍຢືນຢັນຄວາມໝັ້ນຄົງຂອງໂຄງສ້າງໂຄງລົດ. ຮູບແບບສຸດທ້າຍຖືກພິມດ້ວຍໄນລອນຄວາມໜາແໜ້ນສູງ. ລົດຖີບຄັນນີ້ມີຄວາມຍາວ 1630 ມມ, ກວ້າງ 600 ມມ ແລະ ສູງ 832 ມມ. ການພິມສາມມິຕິຊ່ວຍລົບລ້າງຄວາມຈຳເປັນຂອງແມ່ພິມທີ່ມີລາຄາແພງ, ດັ່ງນັ້ນແຕ່ລະໂຄງລົດຈຶ່ງສາມາດອອກແບບໄດ້ຕາມຄວາມຕ້ອງການສະເພາະບຸກຄົນ.
ການຮັບຮູ້
ກ່ຽວກັບ A' Design Award ລະດັບເຫຼັກ
Sprout ຈັກລິຍານ ແມ່ນຜູ້ຊະນະ A' Design Award ລະດັບເຫຼັກ ເຊິ່ງເປັນການຍອມຮັບທີ່ມີກຽດສຳລັບການອອກແບບທີ່ດີ ທີ່ຕອບສະໜອງຄວາມຕ້ອງການທາງວິຊາຊີບ ແລະ ອຸດສາຫະກຳທີ່ຄາດຫວັງຈາກຜົນງານທີ່ອອກແບບມາຢ່າງດີ. ຜູ້ຊະນະລະດັບເຫຼັກສະແດງເຖິງທັກສະອັນຍິ່ງໃຫຍ່ ຄວາມຊຳນານສະເພາະສູງ ຄວາມເຂົ້າໃຈຂອງຜູ້ຊ່ຽວຊານ ແລະ ຄວາມສາມາດໃນການສ້າງສັນຂອງຜູ້ສ້າງ. Sprout ຈັກລິຍານ ຖືກຄາດວ່າຈະເປັນຜົນງານທີ່ໄດ້ຮັບການຍົກຍ້ອງສູງ ໜ້າຊົມເຊີຍ ແລະ ເປັນທີ່ຮັກແພງ ທີ່ໃຊ້ງານໄດ້ຈິງ ແລະ ມີນະວັດຕະກຳ. ການອອກແບບທີ່ຊະນະລະດັບເຫຼັກນີ້ລວມວິທີປະຕິບັດທີ່ດີທີ່ສຸດຂອງອຸດສາຫະກຳ ແລະ ມີຄຸນລັກສະນະທາງເຕັກນິກທີ່ມີຄວາມສາມາດ ເຊື່ອມໂຍງກັບຄວາມຮູ້ ແລະ ພອນສະຫວັນ. Sprout ຈັກລິຍານ ໄດ້ຮັບການເຄົາລົບສຳລັບຄວາມລະອຽດຮອບຄອບ ແລະ ຖືກອອກແບບເພື່ອປັບປຸງຄຸນນະພາບຊີວິດ ຊ່ວຍເຮັດໃຫ້ໂລກເປັນບ່ອນທີ່ດີຂຶ້ນ.
ເບື້ອງຫຼັງການອອກແບບ
ຊຸດຂ່າວ
ຂໍ້ມູນ, ສະມາຊິກທີມ ແລະ ລາຍລະອຽດທາງເຕັກນິກທີ່ສະໜອງໂດຍນັກອອກແບບ.
- ຄຸນສົມບັດພິເສດ
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- ຂະໜາດ ແລະ ບັນຈຸພັນ
- Length 1630mm, width600mm, height 832mm
- ແທັກ
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- ເຕັກໂນໂລຊີການຜະລິດ
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- ສິ່ງທ້າທາຍດ້ານການອອກແບບ
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- ການຄົ້ນຄວ້າ
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- ແຮງບັນດານໃຈ
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- ໄລຍະເວລາໂຄງການ
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- ຂັ້ນຕອນການດຳເນີນງານ
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- ສະມາຊິກທີມ
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
ໂຄສະນາ
ສຳຫຼວດນອກເໜືອຈາກ Designers.org
ຄົ້ນພົບຜະລິດຕະພັນ, ບໍລິການ ແລະ ໂອກາດຈາກຄູ່ຮ່ວມໂຄສະນາຂອງພວກເຮົາ.
ສຳຫຼວດເພີ່ມເຕີມ
ການອອກແບບທີ່ກ່ຽວຂ້ອງ
ສຳຫຼວດການອອກແບບທີ່ໄດ້ຮັບລາງວັນເພີ່ມເຕີມຈາກໝວດໝູ່ດຽວກັນ, ຄັດເລືອກຕາມຄຸນນະພາບ.
