Engo ตู้หุ้มแบตเตอรี่ by Vladimir Zagorac

Engo ตู้หุ้มแบตเตอรี่ by Vladimir Zagorac is a highly esteemed winner of the very prestigious 2023 A' Design Award ລະດັບເຫຼັກ in ການອອກແບບຜະລິດຕະພັນ, ໂຄງການ ແລະ ອຸປະກອນພະລັງງານ Competition Category.

ເຫຼັກພະລັງງານ· 2023

Engo ตู้หุ้มแบตเตอรี่

by Vladimir Zagorac

Client: EnGo Planet

A' Design Award ລະດັບເຫຼັກ Winner in ພະລັງງານ Category

25,558

Verified Award Winner

Verify Award Status for #148633

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Engo ตู้หุ้มแบตเตอรี่

Engo ແມ່ນຕູ້ຫຸ້ມແບັດເຕີຣີແບບວາງຊ້ອນກັນໄດ້ ທີ່ຖືກອອກແບບມາສຳລັບຜະລິດຕະພັນພະລັງງານແສງອາທິດ ແລະ ການນຳໃຊ້ເພື່ອການເກັບຮັກສາພະລັງງານອື່ນໆ. ໂຄງຕູ້ເຮັດຈາກອະລູມິນຽມ ພ້ອມດ້ວຍໂຄງເຫຼັກ, ແຜ່ນພລາສຕິກ ແລະ ວັດສະດຸກັນໄຟຟ້າແບບຢາງ. ຂອບແນວຕັ້ງທີ່ຖືກລົບແຄມ ແລະ ມຸມທີ່ຖືກເຈາະເຂົ້າໄປ ສ້າງເປັນເສັ້ນທາງສາຍໄຟທີ່ຖືກເຊື່ອງໄວ້ ເຮັດໃຫ້ການເດີນສາຍໄຟມີຄວາມເປັນລະບຽບທັງໃນທິດທາງແນວນອນ ແລະ ແນວຕັ້ງ. ຝາຕູ້ທີ່ຍາວອອກມາທາງດ້ານເທິງ ແລະ ດ້ານລຸ່ມຊ່ວຍປົກປິດສາຍໄຟ ແລະ ເຮັດໃຫ້ສາມາດວາງຊ້ອນກັນໄດ້ຢ່າງປອດໄພ ພ້ອມທັງເປີດຊ່ອງວ່າງໄວ້ສຳລັບການເຊື່ອມຕໍ່ຂົ້ວແບັດເຕີຣີ. ຊັ້ນວັດສະດຸກັນຄວາມຮ້ອນສາມຊັ້ນຊ່ວຍຮັກສາໃຫ້ຊຸດແບັດເຕີຣີມີອຸນຫະພູມການເຮັດວຽກທີ່ຄົງທີ່.

The Recognition

About the A' Design Award ລະດັບເຫຼັກ

Engo ตู้หุ้มแบตเตอรี่ ແມ່ນຜູ້ຊະນະ A' Design Award ລະດັບເຫຼັກ ເຊິ່ງເປັນການຍອມຮັບທີ່ມີກຽດສຳລັບການອອກແບບທີ່ດີ ທີ່ຕອບສະໜອງຄວາມຕ້ອງການທາງວິຊາຊີບ ແລະ ອຸດສາຫະກຳທີ່ຄາດຫວັງຈາກຜົນງານທີ່ອອກແບບມາຢ່າງດີ. ຜູ້ຊະນະລະດັບເຫຼັກສະແດງເຖິງທັກສະອັນຍິ່ງໃຫຍ່ ຄວາມຊຳນານສະເພາະສູງ ຄວາມເຂົ້າໃຈຂອງຜູ້ຊ່ຽວຊານ ແລະ ຄວາມສາມາດໃນການສ້າງສັນຂອງຜູ້ສ້າງ. Engo ตู้หุ้มแบตเตอรี่ ຖືກຄາດວ່າຈະເປັນຜົນງານທີ່ໄດ້ຮັບການຍົກຍ້ອງສູງ ໜ້າຊົມເຊີຍ ແລະ ເປັນທີ່ຮັກແພງ ທີ່ໃຊ້ງານໄດ້ຈິງ ແລະ ມີນະວັດຕະກຳ. ການອອກແບບທີ່ຊະນະລະດັບເຫຼັກນີ້ລວມວິທີປະຕິບັດທີ່ດີທີ່ສຸດຂອງອຸດສາຫະກຳ ແລະ ມີຄຸນລັກສະນະທາງເຕັກນິກທີ່ມີຄວາມສາມາດ ເຊື່ອມໂຍງກັບຄວາມຮູ້ ແລະ ພອນສະຫວັນ. Engo ตู้หุ้มแบตเตอรี่ ໄດ້ຮັບການເຄົາລົບສຳລັບຄວາມລະອຽດຮອບຄອບ ແລະ ຖືກອອກແບບເພື່ອປັບປຸງຄຸນນະພາບຊີວິດ ຊ່ວຍເຮັດໃຫ້ໂລກເປັນບ່ອນທີ່ດີຂຶ້ນ.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: The straightforward geometric form of the enclosure is interrupted only by chamfered vertical edges and recessed corners. These details are part of a hidden cabling solution, especially useful within large battery sets, enabling clean and minimally noticeable wiring in any direction, both horizontally and vertically. Extended walls on the top and bottom of the housing keep the cables covered and allow safe stacking while giving enough room to connect the terminals between the stacked pieces.
Dimensions & Packaging: 30Ah unit W: 205mm, D: 90mm, H: 215mm; 60Ah unit W: 220mm, D: 120mm, H: 380mm; 100Ah unit W: 248mm, D: 120mm, H: 556mm.
Tags: Smart Battery, Power Wall, Stackable, Minimal, Cable Management
Production Technology: Aluminum casing, steel frame, plastic plates, rubber insulation
Design Challenge: The battery is to be used in retrofit solar equipment, as an individual product, inside solutions such as power walls, electric vehicles, yachts, etc. That required smart usage of available space. Thermal and water insulation were given careful attention. Three layers of insulation, including ceramic coating, keep the battery pack at a constant temperature and operational between minus twenty and plus eighty degrees Celsius. The rubber used for insulation of the top and bottom of the enclosure gives enough flexibility to compensate for an uneven floor but does not allow capsizing.
Research: A simple production process in any given volume, different sizes of battery packs used, and low starting cost suggested aluminum for the housing. That also planted the idea to use as little manual operation as possible, calling for a minimal but characteristic design that could be produced by CNC cutting and bending. The proportions of the few visible details were refined according to the dimensions of cables, contacts, and connectors, which needed to fit perfectly in the space between the neighboring housings.
Inspiration: The project started with the idea to produce battery casings for a range of EnGo Planet's solar products. After analysis of a typical installation process and everyday usage scenarios, inspiration was found in pure functionality and minimal aesthetic expression. Easy stacking, optimal space usage, and intelligent cable management were the main focus of the design.
Project Duration: The project lasted several weeks and took place in USA and Europe.
Operation Flow: A combination of design details and flexible materials used on the top and bottom of the housing keep the wiring neat and give a clean look to any battery set. The bottom rubber surface features two openings that match the position of the terminals on the unit placed below. The side openings allow lifting the case using a strap, which makes the stacking of heavier versions of the battery easier. The operation and capacity of the unit can be monitored by a smartphone over Bluetooth. The product is available with an optional voltmeter, switch, and USB inlets for charging mobile devices.
Patents: Vladimir Zagorac
Team Members: Vladimir Zagorac
Image Credits: Vladimir Zagorac