Hydrospine Nardymo Balastas – autorius Ludovic Lahccen and Raoul Morel

Darbas Hydrospine Nardymo Balastas, kurio autorius Ludovic Lahccen and Raoul Morel, yra itin vertinamas prestižinio 2023 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Sporto prekių, kūno rengybos ir poilsio įrangos dizainas.

SidabrinisSporto prekės· 2023

Hydrospine Nardymo Balastas

Dizaineris: Ludovic Lahccen and Raoul Morel

Klientas: Apnea Sub

Kategorijos Sporto prekės laimėtojas – Sidabrinis apdovanojimas A' Design Award

756,911

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #148412

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Hydrospine Nardymo Balastas

Nugaros svorio sistema laisvajam nardymui, kuri leidžia išlaikyti itin tikslų balansą ir plūdrumą. Jo turtas, modulinė ir greita keliamoji galia, iki 6 kg, tinkama naudoti bet kurioje padėtyje, bet kokioje laisvojo nardymo disciplinoje. Jame yra greitai atsegamos ir reguliuojamos sagtys, kurias galima pritaikyti prie įvairių dydžių, kad ir kokios lyties būtų, ir tai suteikia neįtikėtiną komfortą, leidžiantį greitai pamiršti nešiojamą svorį. Jo dizainas sukurtas susiliejus jūrų gyvūnams ir greičio reikmėms, kad suteiktų labai hidrodinamines linijas ir optimaliai slystų po vandeniu. Dėl savo universalumo tai yra unikali koncepcija

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Hydrospine Nardymo Balastas laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Hydrospine Nardymo Balastas bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Hydrospine Nardymo Balastas yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Matmenys ir pakuotė: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Žymos: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Gamybos technologija: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Dizaino iššūkis: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Tyrimas: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Įkvėpimas: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Projekto trukmė: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Veikimo eiga: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patentai: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Komandos nariai: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Nuotraukų autoriai: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel