Moon Stalo Šviesa – autorius Naai-Jung Shih

Darbas Moon Stalo Šviesa, kurio autorius Naai-Jung Shih, yra itin vertinamas prestižinio 2020 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje 3D spausdintų formų ir produktų dizainas.

Sidabrinis3D spausdinimas· 2020

Moon Stalo Šviesa

Dizaineris: Naai-Jung Shih

Klientas: Naai-Jung Shih

Kategorijos 3D spausdinimas laimėtojas – Sidabrinis apdovanojimas A' Design Award

54,807

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #95451

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Moon Stalo Šviesa

Ši lemputė vaidina aktyvų vaidmenį lydint žmones darbo erdvėje nuo ryto iki vakaro. Jis buvo sukurtas atsižvelgiant į žmonių darbo aplinką. Laidą galima prijungti prie nešiojamojo kompiuterio arba maitinimo bloko. Mėnulio forma buvo padaryta iš trijų ketvirtadalių apskritimo, kaip kylančios piktogramos iš reljefo vaizdo, pagaminto iš nerūdijančio rėmo. Mėnulio paviršiaus modelis primena nusileidimo vadovą kosminiame projekte. Šis nustatymas atrodo kaip skulptūra dienos šviesoje ir šviesos prietaisas, kuris naktį palengvina įtemptą darbą.

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Moon Stalo Šviesa laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Moon Stalo Šviesa bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Moon Stalo Šviesa yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: A light should be designed with people working devices in mind. It needs to play an active role today as a companion from morning to the night. The solution is a sculpture in the daylight and a light device that ease the tense of work at night. This light can be connected to laptop. The metaphor of moon was made by linear pattern that was used as a landing guide of Apollo project. The shape of moon is made of three quarters of circle as a rising icon from a terrain made of stainless frame.
Matmenys ir pakuotė: The entire set is about 37 by 33 by 19 cm in width, height, and depth. The materials are photosensitive resin for the moon and stainless steel for the supporting frame.
Žymos: table light, desktop installation, moon, symbolic texture, 3C devices
Gamybos technologija: The source of light is made of LED strip that allocates on the peripheral ring. The stainless frame was collected from a flea market. The moon was made by applying a thicken function to a thin layer of surface. The curvature was modified by a mathematic equation. This shift of design paradigm offers me a great freedom in opening up a whole new set of vocabulary during the creation process. The complicated pattern can only be made by 3D printer. It makes me believe there is a strong connection between the order of mathematics and the aesthetics of a moon icon.
Dizaino iššūkis: The combination of the two layers of pattern changes from different viewing angles. The most challenging part was to create a visual depth and in the meantime allowed partial visual penetration. Uniform thickness was applied. The plate or disk is about 28 mm thick in the center and gradually grows to 35 mm on the edge. It is covered by a skin 8 mm thick. The thickness and the space in the middle create a sense of depth that changes the micro expression of the surface. The final thickness of components was also adjusted with light transmitted without potential damage to the structure in 3D printing.
Tyrimas: Researches were made to the image of a moon and how a table light should fit in today working space. The alternation of thin gap and media openings has to be maintained in order to guide a flow of focus along the surface. Researches were also made to the textures of the frame that creates a contrast effect with the photosensitive resin. The thickness of pattern was also studied in order to create a depth effect without enlarging the opening. The aesthetic consideration was applied to make a working space more human.
Įkvėpimas: This design was inspired by the moon. Moon is both aesthetic and philosophical to the symbolization of human imagination. The composition of this light can be considered as the moon rising from a mountain or the sea as it departs from the surface to light up surroundings in the air.
Projekto trukmė: This project started as early as 2018 in Taipei. Various types of configuration were explored in several on-and-off tests before s particular setting was determined. The specific set was finalized in 2019. The duration of last presentation was about two months of intensive works.
Veikimo eiga: The light performances as an installation in daylight. It illuminates as a table light when night arrives. The skin acts as an interface. People can see through the double layers to interact with background with enhanced depth. The convex and concave sides of design represent the surface and underground parts of the moon. The light is turned on or off using a USB hub with buttons to control four devices. It can be connected to a power plug or even a notebook computer. People work next to this light can use it to charge a mobile phone. People gather around this light can share this hub and the light as well.
Nuotraukų autoriai: #1: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#2: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#3: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#4: Photographer Naai-Jung Shih, Designing and Photographing, 2019.
#5: Photographer Naai-Jung Shih, Designing and Photographing, 2019.