Waterlight Lampa — Jiahua Zhang, Nitesh Reddy and Kejun Li

Darbs Waterlight Lampa, kura autors ir Jiahua Zhang, Nitesh Reddy and Kejun Li, ir augsti novērtēts un ļoti prestižās 2021 Bronzas balva A' Design Award ieguvējs kategorijā Apgaismojuma produktu un gaismekļu dizains.

BronzasApgaismojums· 2021

Waterlight Lampa

Autors: Jiahua Zhang, Nitesh Reddy and Kejun Li

Bronzas balva A' Design Award ieguvējs kategorijā Apgaismojums

12,971

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #106626

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Waterlight Lampa

Book Text: Waterlight ir galda lampa, kuras iedvesmas avots ir ūdens krāns. Vadības sviras pagriešana uz augšu un uz leju maina gaismas spilgtumu. Vadības sviras pagriešana no kreisās uz labo pusi regulē krāsas temperatūru. Divi potenciometri lodes iekšpusē – viens horizontāls un viens vertikāls – maina ieejas spriegumu, lai radītu šos efektus. Gaismu rada LED elementi uz pamatnes. Galviņa ir izgatavota no bronzas, augšējais vāks – no dabīga marmora, bet ārējais korpuss – no stikla. Apakšējā vākā ir ievietota bezvadu uzlādes shēma, tāpēc lampu var pārnēsāt no vienas telpas uz otru.

Atzinība

Par Bronzas balva A' Design Award

Waterlight Lampa ir Bronzas balvas A' Design Award ieguvējs, ļoti prestiža atzinība, ko piešķir izciliem dizainiem, kas izceļas ar radošumu, atjautību un viedumu. Bronzas ieguvēji ir pietiekami prasmīgi un pārsteidzoši radoši darbi, kas apliecina to dizaineru plašo pieredzi, iztēli un izdarību. Sagaidāms, ka Waterlight Lampa būs augsti vērtēts, apbrīnots un cienīts priekšmets, ievērojami profesionāls un inovatīvs. Šis ar Bronzas balvu apbalvotais dizains iekļauj labāko praksi mākslā, zinātnē, dizainā un tehnoloģijās un izceļas ar uzmanību detaļām. Waterlight Lampa lieliski apmierina vajadzības, skar vēlmes, valdzina jūtas un piesaista zinātkāri.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Waterlight generates a unique and amazing experience of light control. Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Izmēri un iepakojums: Dimensions: Width 80mm x Depth 80 mm x Height 300 mm.
Technical Properties: The potentiometer is the bridge between the action from the user and the effect of the lamp. It changes the brightness and temperature of the lamp by modifying the input voltage which is controlled by the user through the control bar.
Birkas: Light, Aesthetic, Water, Faucet, Lamp, Desktop
Ražošanas tehnoloģija: The head is fixed with two potentiometers inside the sphere, one is horizontal and the other is vertical. Thus, when the user is turning the control bar up and down, the horizontal potentiometer changes the voltage of the electricity to adjust the brightness of the light; when the user is rolling the control bar left and right, the vertical potentiometer changes the voltage of the electricity to modify the temperature of the light.

The light is provided by the LED cells on a base.

For charging, the bottom lid is integrated with a circuit for wireless charging when it is put on the independent wireless charger that is connected to plugs with wire. The lamp can be taken away after charging (e.g. the lamp is charged in the living room when the user is reading there and taken to the bedroom when the user wants to go there).

The head is made of high-quality bronze, the top lid is made of natural marble. And the outer shell is made of glass.
Dizaina izaicinājums: The biggest challenge was to build the functional potentiometer and circuit to make this design into reality. In the beginning, it was really hard to link the control action and the change of the brightness and temperature of the light in a proper way. The change always went too much or too little. Finally, we found the balance and created a perfect control feeling.
Pētījums: We would like to create an amazing new interaction between the user and the lamp. After a lot of sketches and brainstorming, we came up with this idea and found out that there was not anything like it in the market. So we did five versions of 1:1 scale prototypes to find the best proportion of the shape, enable the potentiometer working, and find the manufacturing process of the marble. It turned out that we need a horizontal and a vertical potentiometer to control the voltage and hence the brightness and temperature of the light. And we found out that the marble can be made by CNC.
Iedvesma: Waterlight was inspired by the water faucet which adjusts the volume of water by being turned up and down, and controls the temperature of water by being turned left and right. It enables users to adjust light like using a water faucet, creating a similar feeling between light control and water control, and bringing about more insights into life.
Projekta ilgums: This project started in October 2019 and finished in January 2020 in Milan.
Darbības plūsma: Turning the control bar up and down changes the intensity of brightness. Turning it from left to right adjusts the temperature of light.
Komandas dalībnieki: Nitesh Reddy N
Kejun Li