Darbs Bend Kafijas Galdiņš, kura autors ir Jan Goderis, ir augsti novērtēts un ļoti prestižās 2023 Bronzas balva A' Design Award ieguvējs kategorijā Mēbeļu dizains.
BronzasMēbeles· 2023
Bend Kafijas Galdiņš
Autors: Jan Goderis
Bronzas balva A' Design Award ieguvējs kategorijā Mēbeles
Verificēts balvas ieguvējs
Verificēt balvas statusu dizainam #148865Dizains
Par Bend Kafijas Galdiņš
Galds ir izgatavots no divām saliektām alumīnija plāksnēm, kas sader kopā. Saliekot kopā, plāksnes sniedzas līdz pat kājām. Tas piešķir dizainam zināmu caurspīdīgumu un vieglumu, un tiek izveidota vertikāla krātuve žurnāliem, laikrakstiem un plediem. Starp divām augšējām plāksnēm ir arī iespēja uzglabāt abās galda pusēs.
Atzinība
Par Bronzas balva A' Design Award
Bend Kafijas Galdiņš ir Bronzas balvas A' Design Award ieguvējs, ļoti prestiža atzinība, ko piešķir izciliem dizainiem, kas izceļas ar radošumu, atjautību un viedumu. Bronzas ieguvēji ir pietiekami prasmīgi un pārsteidzoši radoši darbi, kas apliecina to dizaineru plašo pieredzi, iztēli un izdarību. Sagaidāms, ka Bend Kafijas Galdiņš būs augsti vērtēts, apbrīnots un cienīts priekšmets, ievērojami profesionāls un inovatīvs. Šis ar Bronzas balvu apbalvotais dizains iekļauj labāko praksi mākslā, zinātnē, dizainā un tehnoloģijās un izceļas ar uzmanību detaļām. Bend Kafijas Galdiņš lieliski apmierina vajadzības, skar vēlmes, valdzina jūtas un piesaista zinātkāri.
Aiz dizaina
Preses materiāli
Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.
- Unikālās īpašības
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Izmēri un iepakojums
- Dimensions: 125 x 55 x 28 cm
- Birkas
- coffee table, folded table, ecological design, functional design, minimal design
- Ražošanas tehnoloģija
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Dizaina izaicinājums
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Pētījums
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Iedvesma
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Projekta ilgums
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Darbības plūsma
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patenti
- e-depot: 000595853
- Komandas dalībnieki
- Jan Goderis
- Attēlu autori
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Sponsorēts
Izpētiet ārpus Designers.org
Atklājiet produktus, pakalpojumus un iespējas no mūsu reklāmas partneriem.
Atklājiet vairāk
Saistītie dizaini
Iepazīstiet citus apbalvotos dizainus no tās pašas kategorijas, atlasītus pēc nopelniem.
