Oak Konan Shinagawa Biroju ēka — Obayashi Corporation

Darbs Oak Konan Shinagawa Biroju ēka, kura autors ir Obayashi Corporation, ir augsti novērtēts un ļoti prestižās 2023 Sudraba balva A' Design Award ieguvējs kategorijā Arhitektūras, ēku un būvju dizains.

SudrabaArhitektūra· 2023

Oak Konan Shinagawa Biroju ēka

Autors: Obayashi Corporation

Klients: Obayashi-Shinseiwa Real Estate Corporation

Sudraba balva A' Design Award ieguvējs kategorijā Arhitektūra

17,399

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #149620

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Oak Konan Shinagawa Biroju ēka

Oak Konan Shinagawa ir 12 stāvu biroju ēka, kas atrodas netālu no ostas Tokijā, Japānā. Baltais režģveida ārējais karkass ir no saliekamā dzelzsbetona veidota ārējā čaula, kas kalpo gan kā nesošā konstrukcija, gan kā saulessarga elements. Apvienojumā ar kodola tērauda konstrukciju šī hibrīdstruktūra veido biroja telpu bez kolonnām, kas ļauj veidot elastīgus plānojumus. Saliekamās kolonnas un sijas tiek izgatavotas ārpus būvlaukuma un nolaistas vietā no augšas, kas vienkāršo darbu būvlaukumā. Ārējos logos ir iebūvētas dabiskās ventilācijas vienības, kas atveramas ar noņemamu rokturi.

Atzinība

Par Sudraba balva A' Design Award

Oak Konan Shinagawa Biroju ēka ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Oak Konan Shinagawa Biroju ēka būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Oak Konan Shinagawa Biroju ēka ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: The building is a mid-rise, 12-story office building located near the harbor in Shinagawa, Tokyo.
The distinctive, white lattice-like exterior frame is an outer shell made of precast concrete serving as
structural frame as well as sun-shading device. Combined with the steel construction of the core this
hybrid structure creates a column-free office space. The fusion of structure and finishing enhances high
buildability and sustainability.
Izmēri un iepakojums: [Site area] 2,635.57m2
[Building area] 1,485.79m2
[Total floor area] 16,331.64m2
[Number of floors] 12 floors above ground, 1 floor below ground, tower building 1st floor
[Maximum Height] 56.76m
[Structure] steel construction, reinforced concrete construction in some parts
Birkas: Structural Frame, Facade Design, High Added-Value, High Buildability, Equipment units, Office Interior, Tokyo
Ražošanas tehnoloģija: Supply and exhaust air for the office is provided on the east, west, north sides from equipment units (air supply
units and exhaust air units) built into the aluminum curtain wall inside the columns and beams.
By taking advantage of the depth (500mm) of the exterior shell structure and installing air intake and exhaust air
outlets on the same exterior wall surface, the amount of ductwork in the office ceiling was significantly reduced,
which also contributes to high buildability.
The deep structural frame also controls the amount of direct solar radiation and significantly reduces the heat loads.
Dizaina izaicinājums: Labor shortage in the Japanese Construction Industry is a major challenge.
Although research into new technologies such as construction robots is progressing, there are still few examples of their use in actual construction sites.
One of the major themes of this project is high buildability.
We communicated with the construction staff to find a construction method that was easy to construct and of high quality.
At the same time, as architects, we had to keep creating new ideas for exterior and interior to added-value to the client.
Pētījums: Labor shortage have recently become major challenges in the Japanese Construction Industry.
This building uses precast concrete columns and beams, which serve as both the structure and exterior finishing materials of the shell structure that characterizes the facade.The use of precast concrete elements fabricated off-site ensures high quality and accuracy.
In addition, the structural frame was designed without horizontal connection, which enables to simplify the site erection. Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
Iedvesma: Labor shortage have recently become major challenges in the Japanese Construction Industry.
Structural frame was designed without horizontal connection, which enables to simplify the site erection.
Productivity on site has significantly improved by simply dropping columns and beams from above like building blocks.
The design of the interior in many areas is based on a motif of vertical and
horizontal lines and grids inspired by the facade design.
Projekta ilgums: The project started in September 2020 and finished in July 2022 in Tokyo, Japan.
Darbības plūsma: The column-free office space with a hybrid structure of a precast concrete outer frame and steel construction improves the flexibility of office layout and significantly enhances the convenience of users.
In addition, the exterior windows have natural ventilation window units that can be opened and closed freely by attaching a detachable handle, allowing for direct air intake.
Komandas dalībnieki: Hiroshi Satake
Kenji Matsuoka
Rei Sato
Kazuhiro Yasufuku
Attēlu autori: Image #1: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #2: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #3: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #4: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022
Image #5: Photographer Naomichi Sode (SS Co., Ltd), Oak Konan Shinagawa, 2022