Aida Sekkei Precut Rūpnīca by Nobuaki Miyashita

Aida Sekkei Precut Rūpnīca by Nobuaki Miyashita is a highly esteemed winner of the very prestigious 2024 Zelta balva A' Design Award in Arhitektūras, ēku un būvju dizains Competition Category.

ZeltaArhitektūra· 2024

Aida Sekkei Precut Rūpnīca

by Nobuaki Miyashita

Client: Aida Sekkei Co., Ltd.

Zelta balva A' Design Award Winner in Arhitektūra Category

148,971

Verified Award Winner

Verify Award Status for #160159

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Aida Sekkei Precut Rūpnīca

Aida Sekkei jaunās rūpnīcas plāns ir vērsts uz koka priekšapstrādi. Tās koncepcija balstās uz arhitektūras radīšanu, kas iemieso koksnes apstrādes procesu secību. Tajā iekļauta aptuveni 100 metrus gara, ar stiklu norobežota gājēju galerija rūpnīcas iekšpusē, kas ļauj apmeklētājiem no tuvas distances novērot visu priekšgriešanas procesu. Biroju ēka ir aprīkota ar lielām telpām ar fermām, kas izgatavotas no smailes malu materiāliem, kuri parasti tiek izmantoti kā palīgmateriāli koka mājās. Dizains integrē visus elementus, lai radītu demonstrācijas rūpnīcu, uzsverot redzamību un estētisko pievilcību katrā aspektā.

The Recognition

About the Zelta balva A' Design Award

Aida Sekkei Precut Rūpnīca ir Zelta balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir pirmšķirīgiem, brīnišķīgiem un izciliem dizainiem. Zelta ieguvēji ir ļoti inovatīvi, tālredzīgi un žilbinoši spoži darbi, kas atspoguļo to dizaineru talantu, gudrību un meistarību. Sagaidāms, ka Aida Sekkei Precut Rūpnīca būs ļoti slavēts, tendenci veidojošs un monumentāls izgudrojums, kas sniedz nebijušu vērtību. Šis ar Zelta balvu apbalvotais dizains ir lielisks, cienīts projekts, kas paplašina mākslas, zinātnes, dizaina un tehnoloģiju robežas. Aida Sekkei Precut Rūpnīca izraisa intensīvu vēlmi, modina kaislību, veicina radošumu un valdzina.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Dimensions & Packaging: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Tags: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Production Technology: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Design Challenge: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Research: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspiration: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Project Duration: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Operation Flow: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patents: None
Image Credits: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020