Morita Wds 2023 Izstāžu stends — Shotaro Inahara

Darbs Morita Wds 2023 Izstāžu stends, kura autors ir Shotaro Inahara, ir augsti novērtēts un ļoti prestižās 2025 Sudraba balva A' Design Award ieguvējs kategorijā Tirdzniecības izstāžu arhitektūras, interjeru un eksponātu dizains.

SudrabaTirdzniecības izstāde· 2025

Morita Wds 2023 Izstāžu stends

Autors: Shotaro Inahara

Klients: HAKUTEN Corporation

Sudraba balva A' Design Award ieguvējs kategorijā Tirdzniecības izstāde

20,012

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #162228

Apmeklēt vietni Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Morita Wds 2023 Izstāžu stends

Morita Wds 2023 ir izstāžu stends, kas radīts zobārstniecības iekārtu ražotājam. Stenda izmēri ir 32000 x 15000 x 4500 milimetri. Dizains atklāj produktu tapšanas fonu, nevis tikai pašus produktus. Detaļas ir izjauktas un izstādītas, iekšējie mehānismi ir redzami caur caurspīdīgiem lodziņiem, un izmēri ir atklāti, lai izskaidrotu dizaina ieceri. Sienu paneļi ir izgatavoti no metāla lokšņu atgriezumiem, kas palikuši pēc štancēšanas. Konstrukcija ir nostiprināta ar skrūvēm bez līmes izmantošanas, tāpēc materiālus var pārstrādāt.

Atzinība

Par Sudraba balva A' Design Award

Morita Wds 2023 Izstāžu stends ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Morita Wds 2023 Izstāžu stends būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Morita Wds 2023 Izstāžu stends ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Began with a deep understanding of Morita by reading the technical history that describes how the products were made. The exhibition also included a tour of the manufacturing process and interviews about the company's commitment to its products. The exhibition also included a fascinating behind-the-scenes look at the products, including an introduction to the development story, a transparent and disassembled mechanism display, and an appeal to the design intent by exposing the dimensions.
Izmēri un iepakojums: The overall dimensions of the booth are W32000 x D15000 x H4500 mm.
Birkas: Exhibition,Booth,Sustainability,Branding,Luminous Signs,Dental,Equipment
Ražošanas tehnoloģija: The “MORITA MUSEUM” sign. The sign is side-illuminated, and one side is embedded in the wall to suggest that this is a booth that attracts visitors to Morita from a different angle.
The base design of the graphics is based on drawings, which gives visitors a sense of the product manufacturing process.
The wrighting of the corner signs is not based on product names, but on words that are beneficial to visitors, in order to induce their interest in the contents of the corner.
Dizaina izaicinājums: Based on the above, the booth will be a “fascinating display of the invisible” by (1) disassembling the product part by part, (2) introducing the development process and its secret story, (3) showing the internal mechanism through a transparent window, and (4) showing the design attention to detail through the dimensions of the product.
Pētījums: We also visited Morita Manufacturing Corporation, where the products are actually manufactured, to observe the manufacturing process and hear about the developer's commitment to the products.
Iedvesma: Morita also exhibited at the annual regional dental shows. There, the company exhibits directly related to sales promotion, focusing on products and services, and it was a place to sell products. This year's WDS will focus not only on products, but also on their backgrounds. Who and what kind of thoughts and processes go into the making of a product. The experience was designed as a branding opportunity for people to learn more about Morita and become fans.
Projekta ilgums: The project started in September 29, 2023 and finished in October 1, 2023 in Yokohama.
Darbības plūsma: On the wall, we used a scrap piece of sheet metal from which parts had been die-cut.The design matched the concept of this exhibition as a material reminiscent of the manufacturing process, and the design also functioned as an eye-catcher, attracting visitors' interest by allowing them to see inside the booth through the hole in the wall.
The booth was fixed with screws, without using any adhesives, so that it could be returned to the factory and returned to the normal recycling flow.
Komandas dalībnieki: Designer : Shotaro Inahara
Art Director : Akiyuki Maruyama
Producer : Tatsuya Sato
Producer : Riku Nishihara
Product Manager : Toshiki Takei
Attēlu autori: Image #No1~5 : Photographer, Akira Arai.