Kinuta Dzīvojamā māja — Nobuaki Miyashita

Darbs Kinuta Dzīvojamā māja, kura autors ir Nobuaki Miyashita, ir augsti novērtēts un ļoti prestižās 2026 Bronzas balva A' Design Award ieguvējs kategorijā Arhitektūras, ēku un būvju dizains.

BronzasArhitektūra· 2026

Kinuta Dzīvojamā māja

Autors: Nobuaki Miyashita

Klients: AIDA SEKKEI Co., Ltd.

Bronzas balva A' Design Award ieguvējs kategorijā Arhitektūra

6,382

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #181404

Apmeklēt vietni Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Kinuta Dzīvojamā māja

Kinuta ir dzīvojamā māja, kas uzbūvēta uz šaura pilsētas zemesgabala Tokijā, Japānā. Zemesgabala platums ir 3,6 m, un būvlaides noteikumi samazina efektīvo fasādes platumu līdz mazāk nekā 2,6 m. Dzīvojamā istaba, ēdamistaba un virtuve ir izvietotas otrajā stāvā, lai nodrošinātu privātumu un dienvidu puses dienasgaismu. Ar sienu norobežots iekšpagalms ar koka klāju un apstādītām zaļajām sienām pārvērš būvlaides zonu par klusu āra telpu. Ieeja, gaitenis un kāpnes veido lineāru secību, kas uzsver dziļumu. Tumšs keramikas apšuvums ar sauso šuvju sistēmu nodrošina fasādes šuvju nepārtrauktību, tostarp arī stūros.

Atzinība

Par Bronzas balva A' Design Award

Kinuta Dzīvojamā māja ir Bronzas balvas A' Design Award ieguvējs, ļoti prestiža atzinība, ko piešķir izciliem dizainiem, kas izceļas ar radošumu, atjautību un viedumu. Bronzas ieguvēji ir pietiekami prasmīgi un pārsteidzoši radoši darbi, kas apliecina to dizaineru plašo pieredzi, iztēli un izdarību. Sagaidāms, ka Kinuta Dzīvojamā māja būs augsti vērtēts, apbrīnots un cienīts priekšmets, ievērojami profesionāls un inovatīvs. Šis ar Bronzas balvu apbalvotais dizains iekļauj labāko praksi mākslā, zinātnē, dizainā un tehnoloģijās un izceļas ar uzmanību detaļām. Kinuta Dzīvojamā māja lieliski apmierina vajadzības, skar vēlmes, valdzina jūtas un piesaista zinātkāri.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: A premium residence for a family of three on an "eel's bed" plot. Although the site is 3.6 m wide, setback rules reduce the effective frontage to under 2.6 m. The LDK is lifted to the second floor for privacy and southern daylight, while a walled courtyard with a timber deck and green walls turns the setback zone into a calm outdoor room. A continuous frame integrates the boundary wall, balcony, and eaves, giving a strong identity to a minimal frontage.
Izmēri un iepakojums: Site area 54.97 m2. Building area 27.48 m2. Total floor area 54.96 m2. Building frontage 2680 mm. Long narrow site approx. 3.6 m by 15 m. Eaves height from design GL 6.810 m. Main living, dining, and kitchen on the second floor. Courtyard and deck within the setback zone.
Birkas: Narrow House, Urban Infill, Courtyard, Setback Strategy, Second Floor Living, Privacy and Daylight, Dry Joint Facade, Compact Residence, Tokyo Housing
Ražošanas tehnoloģija: The exterior uses dark ceramic siding designed for a dry joint system. The panel module and joint layout were coordinated from the early design stage to keep the joint rhythm continuous, including at corners. A white post and nameplate, together with dark metal fittings, are composed as sharp accents. Inside, the courtyard deck and planted green walls form a durable interface between interior life and an outdoor retreat.
Dizaina izaicinājums: The hardest challenge was achieving comfort and dignity within severe statutory limits. Facing a 4 m wide road, the building was tightly controlled by slant plane and setback regulations, with no relaxation available and sky factor use not permitted. At the same time, close neighbors required strong privacy. The design responds by lifting the LDK, inserting a walled courtyard, and refining facade joints to maintain architectural tension at a very small scale.
Pētījums: ype of research: Applied design research for compact housing. Objective: Maximize daylight, privacy, and perceived spaciousness under strict setback rules. Methodology: Iterative massing studies, section checks, and module studies for dry joint cladding. Tools: Sketches, scaled models, and CAD. Results: A second floor LDK and a setback courtyard that add light and a private outdoor room, plus a facade with a continuous joint rhythm. Impacts: A transferable approach for premium living on narrow urban plots.
Iedvesma: The project was driven by a question: how can a very narrow house feel generous without relying on tricks? In dense Tokyo neighborhoods, privacy and sunlight are often traded off. By moving the living spaces upward and carving a courtyard within the regulatory setback, the house gains light, air, and a personal exterior space. The facade detailing was inspired by product-like precision, with dry-joint planning from the earliest design stage to keep corners crisp.
Projekta ilgums: Designed and completed in Setagaya (Kinuta), Tokyo, Japan.
Darbības plūsma: A linear sequence begins at the entrance and continues as a corridor and stair, emphasizing depth on the narrow plot. Arrival to the second floor LDK opens to southern light and a private courtyard. Daily living extends to the timber deck and green walls. The continuous frame unifies the balcony, eaves, and boundary wall, defining the home's compact yet premium character.
Patenti: All images and project content are Nobuaki Miyashita / MR STUDIO Co.,Ltd.
Attēlu autori: Image #1: Nobuaki Miyashita
Image #2: Nobuaki Miyashita
Image #3: Nobuaki Miyashita
Image #4: Nobuaki Miyashita
Image #5: Nobuaki Miyashita