Continuous Plate House 2.0 Dzīvesvietas Remonts — Ryumei Fujik and Yukiko Sato

Darbs Continuous Plate House 2.0 Dzīvesvietas Remonts, kura autors ir Ryumei Fujik and Yukiko Sato, ir augsti novērtēts un ļoti prestižās 2020 Bronzas balva A' Design Award ieguvējs kategorijā Interjera, tirdzniecības un izstāžu dizains.

BronzasInterjers· 2020

Continuous Plate House 2.0 Dzīvesvietas Remonts

Autors: Ryumei Fujik and Yukiko Sato

Klients: F.a.d.s

Bronzas balva A' Design Award ieguvējs kategorijā Interjers

18,009

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #92851

Apmeklēt vietni Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Continuous Plate House 2.0 Dzīvesvietas Remonts

Šī māja ir renovēta galvenokārt pirmajā stāvā, jo 18 gadu pabeigšanas. Remonts prasīja esošo virtuves zonu, kas sastāv no virtuves, brokastu stūra un pārtikas noliktavas, mainīt pret dažādām vajadzībām izmantojamu telpu. Lai apmierinātu šo pieprasījumu, tika likvidēta pārtikas novietne un koridori, padarot visu telpu vienas telpas platu, un izlietne tika mainīta no sienas montējamas uz salas tipa, padarot to vairāk vietas, kas centrēta uz virtuves iekārtu. . Tā ir atdzimusi kā mierīga un mājīga telpa, jo ir klāta ar koka apdari.

Atzinība

Par Bronzas balva A' Design Award

Continuous Plate House 2.0 Dzīvesvietas Remonts ir Bronzas balvas A' Design Award ieguvējs, ļoti prestiža atzinība, ko piešķir izciliem dizainiem, kas izceļas ar radošumu, atjautību un viedumu. Bronzas ieguvēji ir pietiekami prasmīgi un pārsteidzoši radoši darbi, kas apliecina to dizaineru plašo pieredzi, iztēli un izdarību. Sagaidāms, ka Continuous Plate House 2.0 Dzīvesvietas Remonts būs augsti vērtēts, apbrīnots un cienīts priekšmets, ievērojami profesionāls un inovatīvs. Šis ar Bronzas balvu apbalvotais dizains iekļauj labāko praksi mākslā, zinātnē, dizainā un tehnoloģijās un izceļas ar uzmanību detaļām. Continuous Plate House 2.0 Dzīvesvietas Remonts lieliski apmierina vajadzības, skar vēlmes, valdzina jūtas un piesaista zinātkāri.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
Izmēri un iepakojums: The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
Birkas: Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
Ražošanas tehnoloģija: The Kitchen area is covered with spruce CLT panels (made in Austria).
Dizaina izaicinājums: How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
Pētījums: Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
Iedvesma: This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
Projekta ilgums: This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
Komandas dalībnieki: Ryumei Fujiki
Yukiko Sato
Attēlu autori: Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira