Darbs Saltatur Primārā funkcija: Galds, kura autors ir Masoud Akbarzadeh, ir augsti novērtēts un ļoti prestižās 2020 Sudraba balva A' Design Award ieguvējs kategorijā Mēbeļu dizains.
SudrabaMēbeles· 2020
Saltatur Primārā funkcija: Galds
Autors: Masoud Akbarzadeh
Klients: Polyhedral Structure Laboratory
Sudraba balva A' Design Award ieguvējs kategorijā Mēbeles
Verificēts balvas ieguvējs
Verificēt balvas statusu dizainam #99680Dizains
Par Saltatur Primārā funkcija: Galds
Saltatur ir liela laiduma galds, kas veidots kā rūpnieciski izgatavota kompozītstruktūra. Galds apvieno tikai spiedei pakļautu betona korpusu, pēcspriegotas tērauda stieņas un īpaši plānu stikla virsmu. Stikla virsma ir veidota kā funikulāra trīsšarnīru velve ar 3,75 metru laidumu. Konstruktīvā forma tika izstrādāta, izmantojot trīsdimensiju grafisko statiku, tāpēc betona korpusu spiedē notur stiepes saites augšā un apakšā. Diskrētā telpiskā sistēma samazina betona apjomu un oglekļa pēdas nospiedumu, vienlaikus saglabājot masu, kas nepieciešama konstruktīvajam sniegumam.
Atzinība
Par Sudraba balva A' Design Award
Saltatur Primārā funkcija: Galds ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Saltatur Primārā funkcija: Galds būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Saltatur Primārā funkcija: Galds ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.
Aiz dizaina
Preses materiāli
Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.
- Unikālās īpašības
- The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
- Izmēri un iepakojums
- 195 cm (W) x 308 cm (L) x 90 cm (H)
- Birkas
- composite, ultra thin spatial concrete, design for reassembly, funicular structures
- Ražošanas tehnoloģija
- There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
- Dizaina izaicinājums
- Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
- Pētījums
- The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
- Iedvesma
- The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
- Projekta ilgums
- 2 years, Weitzman School of Design, University of Pennsylvania
- Darbības plūsma
- The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
- Patenti
- N/A
- Komandas dalībnieki
- Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
- Attēlu autori
- Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory
Sponsorēts
Izpētiet ārpus Designers.org
Atklājiet produktus, pakalpojumus un iespējas no mūsu reklāmas partneriem.
Atklājiet vairāk
Saistītie dizaini
Iepazīstiet citus apbalvotos dizainus no tās pašas kategorijas, atlasītus pēc nopelniem.
