Ko te hoahoa Arch Tūru, Tūru Kore Tuara nā Edvard Glazebrook he kaitoa whakahirahira o te 2021 A' Design Award Parahi i te Wāhanga Whakataetae Hoahoa Taputapu.
ParahiTaputapu· 2021
Arch Tūru, Tūru Kore Tuara
Kaitoa o te A' Design Award Parahi i te Wāhanga Taputapu
Kaitoa Tohu Manatokohia
Manatokohia te Tūnga Tohu mō #106853Te Hoahoa
Mō Arch Tūru, Tūru Kore Tuara
Ko Arch he tūru me tētahi nohoanga kore tuara i hangaia mai i te rakau paina whakapaparanga kua whakairohia, kua tāia hoki ki te waikano pango. Ko te hoahoa e ahu mai ana i ngā āhua me ngā hanga ngāwari, tukurua hoki, e homai ana ki te taputapu he whakaaturanga ōrite me te whai take. E rima ngā kōpani ōrite e hanga ana i ngā waewae me te tuara o te tūru, ā, ko te nohoanga kore tuara i hangaia mai i ngā hawhe-kōpani e toru e tūtaki ana ki waenganui. Ka tapahia ngā wāhi katoa mai i tētahi papa rākau whakapaparanga mā te miihini CNC router, kātahi ka piri, ka hono ki ngā tākuru rākau. Ko ngā kōpiko e whakakaha ana i te taputapu i ōna wāhi ngoikore rawa.
Te Whakamihi
Mō te A' Design Award Parahi
Ko Arch Tūru, Tūru Kore Tuara te toa o te A' Design Award Parahi, he whakaaetanga tino whai mana e hoatu ana ki ngā hoahoa kōeke e tohua ana mā te auaha, te mahi mōhio me te whakaaro hōhonu. Ko ngā toa Parahi he mahi pukenga e rite ana, he auaha mīharo, e whakatūturu ana i te wheako nui, te whakaaro me te mōhio-ā-ringa o ā rātou kaihoahoa. E tūmanakohia ana ko Arch Tūru, Tūru Kore Tuara he taonga whakanuia, whakamīharotia, aroha nui, he ngaio, he auaha hoki. Ko tēnei hoahoa i toa i te Parahi e whakauru ana i ngā tikanga pai rawa i te toi, te pūtaiao, te hoahoa me te hangarau, ā, he tino mīharo ki ngā taipitopito. Ka whakatutuki a Arch Tūru, Tūru Kore Tuara i ngā hiahia, ka pā ki ngā hiahia, ka whakaoho i ngā kare-ā-roto, ā, ka kume i te pākiki.
I Muri i te Hoahoa
Kete Pāpāho
Ngā whakamihi, ngā mema o te rōpū me ngā taipitopito hangarau i whakaratohia e te kaihoahoa.
- Āhuatanga Motuhake
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Inenga & Pēketanga
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tūtohu
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Hangarau Whakanao
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Wero Hoahoa
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Rangahau
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Whakaaweawe
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Roanga o te Kaupapa
- The project started in march 2020 - and finished in late May 2020.
- Rerenga Mahi
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Pātene
- Copyrights belong to Edvard Glazebrook, 2020
- Ngā Mema o te Rōpū
- Edvard Glazebrook
Kaitautoko
Tūhuratia i Tua Atu o Designers.org
Kimihia ngā hua, ngā ratonga me ngā āheinga mai i ā mātou hoa whakatairanga.
Ētahi Atu Hei Tūhura
Ngā Hoahoa e Hono Ana
Tūhuratia ētahi atu hoahoa whiwhi tohu mai i te kāwai kotahi, kua kōwhiria mā te kounga.
