Ko te hoahoa Plan Ta Oko Wāhanga nā Xavier Zhagui he kaitoa whakahirahira o te 2024 A' Design Award Rino i te Wāhanga Whakataetae Hoahoa Āhua Tā Āhua-Toru me ngā Hua.

RinoTā Āhua-Toru· 2024

Plan Ta Oko Wāhanga

nā Xavier Zhagui

Kiritaki: DEZIGN for X

Kaitoa o te A' Design Award Rino i te Wāhanga Tā Āhua-Toru

34,593

Kaitoa Tohu Manatokohia

Manatokohia te Tūnga Tohu mō #159751

Torohia te Pae Tirohia i te A' Design Award Pānui Pāpāho Tohu Tohu

Ngā Tae

Te Hoahoa

Mō Plan Ta Oko Wāhanga

I whakahihiri te kaihanga e āna wheako tamarikitanga i te tipu ake i waenga i ngā tipu māori me ngā paraka hanga i tōna rūma. Nā tēnei i puta ake te pātai mēnā he huarahi hei whakakotahi i ēnei mea e rua. Mā te whakamahi i ngā āhuatanga motuhake o ngā ahuata maha-mata whakakī-wāhi me te tā-toru-āhua, i kitea e te kaihanga tētahi whakautu ki tēnei pātai. Ko te hua ko Plan Ta, he pūnaha o ngā paraka hanga autō mō ngā tipu e taea ana te pupuri i te kanorau o ngā tipu ā-whare, ā, ka taea anō hoki te hanga me te tākaro.

Te Whakamihi

Mō te A' Design Award Rino

Ko Plan Ta Oko Wāhanga te toa o te A' Design Award Rino, he whakaaetanga whai mana e hoatu ana ki ngā hoahoa pai e whakatutuki ana i ngā hiahia ngaio me te ahumahi e tūmanakohia ana mai i ngā mahi kua hoahoatia pai. Ko ngā toa Rino e whakaatu ana i te pukenga nui, te tohungatanga teitei, te māramatanga mātanga me te kaha auaha o ō rātou kaihanga. E tūmanakohia ana ko Plan Ta Oko Wāhanga he mahi whakanuia, whakamīharotia, aroha nui, he whaihua, he auaha hoki. Ko tēnei hoahoa i toa i te Rino e whakakotahi ana i ngā tikanga pai rawa o te ahumahi, ā, he āhuatanga hangarau pūkenga tōna e hono ana ki te mōhio me te pūmanawa. E whakahonoretia ana a Plan Ta Oko Wāhanga mō tōna tōtika, ā, i hoahoatia hei whakapai ake i te kounga o te oranga me te āwhina i te ao kia pai ake.

I Muri i te Hoahoa

Kete Pāpāho

Ngā whakamihi, ngā mema o te rōpū me ngā taipitopito hangarau i whakaratohia e te kaihoahoa.

Āhuatanga Motuhake: Utilizing the unique properties of space filling polyhedrons and 3D printing, I was able to create a system of magnetic planter building blocks that you can play and build with. The modular properties of the design allow for space saving advantages by packing multiple planters together into one structure rather than spread out on a surface. A series of sizes has been created to house different types of plants, the smallest being an air plant, and the biggest being a house plant.
Inenga & Pēketanga: Small Vase
50.8mm x 71.8mm x 50.8mm
Large Vase
127mm x 179.6mm x 127mm
Tūtohu: 3D Printing, Vase, Modular, digital fabrication, dezignforx
Hangarau Whakanao: Inner and outer shell are (FDM) 3d printed with a textured finish. Neodymium Sphere magnets are inserted as the connection points. The material is PETG for its water resistance.
Wero Hoahoa: Creating an intuitive module that functioned both as a planter and building blocks that were fun and easy to build with.
Rangahau: Creating a modular form that was intuitive to use and had a simple form led me to research space-filling polyhedrons. Utilizing the rapid prototyping abilities of 3d printing I was able to iterate and experiment with various polyhedron forms to find the most efficient solution. After concluding that rhombic dodecahedron would be the most balanced solution between efficiency and aesthetics, I experimented with different joint connections that would join the modules together. A series of freely rotating magnetic spheres inserted into the vase provided a simple yet effective way of joining the modules together. Material was the final stage of research, 3D printed PLA was the initial choice for its unique characteristics of biodegradability. Unfortunately, it is a very porous material which allowed drainage water leak from the vase. 3D printed PETG was more effective for its water-resistant properties. PETG is not biodegradable compared to PLA, but we are currently researching ways to recycle and cut waste, such as utilizing print to order 3d printing manufacturing strategies compared to wasteful mass production plants.
Whakaaweawe: During my childhood I found a deep appreciation for natural plants in my room, and I spent a lot of time playing around and creating with building blocks. I wondered if there was a way to combine the two simple ideas. That question is what drove me to explore different geometries and manufacturing processes such as 3D printing to discover a solution.
Roanga o te Kaupapa: The project was started in July 2018 in Las Vegas and is in the final stages of development for production.
Rerenga Mahi: All vases connect to each other magnetically by aligning the faces of a vase of the same size allowing you to stack them in any axis. A wall mount has also been designed, allowing you to tile any size vase onto a vertical surface. There are two sizes available, a small one and a large one.
For the small vase you simply insert the air plant into the vase and take it out when it needs to be watered. The large vase has two shells, an interior shell where the plant lives in, and the exterior shell that collects the drainage. To ease maintenance, the interior shell can be removed to allow for easier watering and trimming.
Pātene: Patent Pending
Ngā Mema o te Rōpū: Xavier Zhagui
Whakamana Whakaahua: All Images: Photographer Xavier Zhagui, Plan-Ta, 2024.