Aspen Kapalo Tripod dek Colorado Tripod Company adolah pamenang nan sangaik tahormat dari A' Design Award Perak 2021 nan sangaik prestigius dalam Kategori Kompetisi Paralatan Fotografi.
PerakParalatan Fotografi· 2021
Aspen Kapalo Tripod
Klien: Colorado Tripod Company
Pamenang A' Design Award Perak dalam Kategori Paralatan Fotografi
Pamenang Pangharogaan Taverifikasi
Verifikasi Status Pangharogaan untuak #108315Desain
Tantang Aspen Kapalo Tripod
Aspen adolah kapalo tripod nan dirancang untuak mampamudah komposisi fotografi. Rangka nan tabukak mambuek kamera nan tapasang bisa baputa jauah malampaui 90 darajaik dalam duo arah, mambari parubahan capek antaro orientasi landscape jo portrait tanpa paralu braket-L nan gadang. Bola tu punyo inti nan bolong jo lubang-lubang nan mangurangi barek sambia tatap manjago kakuatan. Klem tuas nan bisa diatua manahan babagai jinih plat kamera, kontrol friksi manantukan hambatan, sarato kunci panning mambari izin baputa panuah untuak foto panorama. Aspen dibuek dari aluminium nan di-anodisasi kareh.
Pangakuan
Tantang A' Design Award Perak
Aspen Kapalo Tripod adolah pamenang A' Design Award Perak, sabuah pangakuan nan luar biaso bapresti nan dibarikan ka rancangan tingkaik tatinggi, elok jo mangesankan. Pamenang Perak adolah karya nan sangaik cemerlang jo sangaik kreatif nan mamparlihatkan kapakaran, bakaik jo katajaman pikiran parancangnyo. Aspen Kapalo Tripod dipaokan manjadi karya nan mangaguikan, contoh tauladan, sangaik profesional jo inovatif sacaro dalam. Rancangan nan manang Perak iko adolah panemuan nan nampak jo dikagumi nan mambari sumbangan untuak maluaskan batas seni, ilimu, rancangan jo teknologi. Aspen Kapalo Tripod adolah ciptaan nan dicamburui banyak urang, nan mambangkikkan karinduan, mambaok parasaan positif jo malahiakan karagumon jo kakaguman.
Di Baliak Desain
Kit Pers
Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.
- Sifat Unik
- The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
- Dimensi & Kemasan
- Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg - Tag
- tripod head, ball head, camera support, tripod, photography accessory
- Teknologi Produksi
- The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
- Tantangan Desain
- In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
- Penelitian
- A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
- Inspirasi
- The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
- Durasi Proyek
- The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
- Alua Operasi
- A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
- Paten
- Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
- Anggota Tim
- Colorado Tripod Company
Disponsori
Jelajahi di Lua Designers.org
Tampak produk, layanan jo kasempatan dari mitra iklan kami.
Labiah Banyak untuak Dijelajahi
Desain Takaik
Jelajahi desain pamenang penghargaan lain dari kategori nan samo, dipiliah bardasarkan mutu.
