Sprout Sapedo dek JunXiang Cheng and Yi Yang adolah pamenang nan sangaik tahormat dari A' Design Award Basi 2022 nan sangaik prestigius dalam Kategori Kompetisi Cetak 3D.
BasiCetak 3D· 2022
Sprout Sapedo
dek JunXiang Cheng and Yi Yang
Klien: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao
Pamenang A' Design Award Basi dalam Kategori Cetak 3D
Pamenang Pangharogaan Taverifikasi
Verifikasi Status Pangharogaan untuak #137286Desain
Tantang Sprout Sapedo
Sprout marupokan sapedo nan dihasialkan malalui pencetakan tigo dimensi. Rangko dibantuak malalui optimisasi topologi, nan manempatkan bahan hanyo di tampek nan diparalukan sarato mangurangi jumlah bahan nan dipakai sacaro kasaluruhan. Analisis tegangan statis jo metoda elemen hinggo mambuktikan kastabilan struktur rangko tu. Model akhia dicetak jo bahan nilon nan bakapadatan tinggi. Sapedo ko baukuran 1630 mm panjangnyo, 600 mm labianyo, jo 832 mm tingginyo. Pencetakan ko manghilangkan kaparaluan ka cetakan (molds) nan mahal, sahinggo satiok rangko bisa dirancang sacaro individual sesuai kainginan.
Pangakuan
Tantang A' Design Award Basi
Sprout Sapedo adolah pamenang A' Design Award Basi, sabuah pangakuan nan bapresti nan dibarikan ka rancangan nan elok nan mamanuhi kaparluan profesional jo industri nan dipaokan dari ciptaan nan dirancang jo elok. Pamenang Basi mamparlihatkan kamahiran nan gadang, spesialisasi nan tinggi, pamahaman pakar jo kapasitas kreatif panciptanyo. Sprout Sapedo dipaokan manjadi ciptaan nan sangaik dihormati, dikagumi jo disayangi, nan praktis jo inovatif. Rancangan nan manang Basi iko mamasukkan praktik tabaik industri jo punyo ciri teknis nan cakap nan bapautan jo ilimu jo bakaik. Sprout Sapedo dihormati karano katalitiannyo jo dirancang untuak maningkekkan kualitas hiduik jo mambantu manjadikan dunia tampek nan labiah elok.
Di Baliak Desain
Kit Pers
Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.
- Sifat Unik
- Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
- Dimensi & Kemasan
- Length 1630mm, width600mm, height 832mm
- Tag
- Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
- Teknologi Produksi
- The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
- Tantangan Desain
- The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
- Penelitian
- Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
- Inspirasi
- According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
- Durasi Proyek
- The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
- Alua Operasi
- By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
- Anggota Tim
- Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao
Disponsori
Jelajahi di Lua Designers.org
Tampak produk, layanan jo kasempatan dari mitra iklan kami.
Labiah Banyak untuak Dijelajahi
Desain Takaik
Jelajahi desain pamenang penghargaan lain dari kategori nan samo, dipiliah bardasarkan mutu.
