Horizontal Long Mesh Стојка за оган од Shigeru Yamada

Дизајнот Horizontal Long Mesh Стојка за оган од дизајнерот Shigeru Yamada е високо ценет добитник на престижната 2024 Сребрена награда A' Design Award во натпреварувачката категорија Дизајн на опрема за кампување и опрема за на отворено.

СребренаОпрема за кампување· 2024

Horizontal Long Mesh Стојка за оган

од Shigeru Yamada

Клиент: Norinori Life

Добитник на Сребрена награда A' Design Award во категоријата Опрема за кампување

164,851

Верифициран добитник на награда

Верифицирај го статусот на наградата за #153103

Посетете ја страницата Погледнете на A' Design Award Соопштение за печат Значка за награда

Бои

Дизајнот

За Horizontal Long Mesh Стојка за оган

Додека отворените огнови можат да ја оштетат тревната покривка и почвата, овој лесен и компактен производ со рамка од не'рѓосувачки челик и конкавно обликување на мрежата ви овозможува да уживате во огнови во различни средини без ширење на пепел или огнени искри во околината. Патентираната структура во Јапонија овозможува пламените да продрат низ мрежата ноќе, овозможувајќи ви да гледате како дрвото нежно се претвора во пепел.

Признанието

За Сребрена награда A' Design Award

Horizontal Long Mesh Стојка за оган е добитник на Сребрената награда A' Design Award, извонредно престижно признание што се доделува на врвни, прекрасни и импресивни дизајни. Сребрените добитници се исклучително бриљантни и многу креативни дела што ја покажуваат одличната стручност, талентот и проникливоста на нивните дизајнери. Се очекува Horizontal Long Mesh Стојка за оган да биде прекрасно, примерно, извонредно професионално и длабоко иновативно дело. Овој дизајн со Сребрена награда е значаен, восхитуван пронајдок што придонесува за поместување на границите на уметноста, науката, дизајнот и технологијата. Horizontal Long Mesh Стојка за оган е творба на која многумина и завидуваат, која ги буди желбите, носи позитивни чувства и предизвикува восхит и чудење.

Зад дизајнот

Прес-комплет

Заслуги, членови на тимот и технички детали обезбедени од дизајнерот.

Уникатни својства: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Димензии и пакување: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Ознаки: Outdoor, Camping, Bonfire
Производствена технологија: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Дизајн предизвик: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Истражување: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Инспирација: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Траење на проектот: This product was launched in Japan on September 1, 2021
Оперативен тек: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Патенти: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Членови на тимот: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Кредити за слики: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.