Perak Tekstil · 2021
DefeXtiles Teknik Fabrikasi Tekstil
by Jack Forman
- A' Design Award Perak 2021 in Tekstil
- CLIENT: Tangible Media Group, Mit Media Lab
- Estimated Number of Design Views: 53,867
- Verification code 20417FBA61 · Verify this award
Colors
About DefeXtiles Teknik Fabrikasi Tekstil
DefeXtiles ialah teknik fabrikasi tekstil yang menghasilkan fabrik nipis dan fleksibel pada pencetak 3D standard. Kaedah ini mengawal kekurangan ekstrusi supaya gumpalan kecil terbentuk dengan helaian halus di antaranya. Jurang berkala yang terhasil memberikan penampilan tenunan, kebolehtelapan udara, fleksibiliti dan keanjalan, walaupun dengan bahan tegar seperti asid polilaktik. Fabrik ini dicetak berserenjang dengan katil cetakan, jadi bentuk berlipat, melengkung dan kompleks boleh dihasilkan. Aplikasinya termasuk pakaian, antara muka ketara dan mainan.
About the A' Design Award Perak
DefeXtiles Teknik Fabrikasi Tekstil ialah pemenang A' Design Award Perak, pengiktirafan yang sangat berprestij yang dianugerahkan kepada reka bentuk bertaraf tinggi, indah dan mengagumkan. Pemenang Perak ialah karya yang amat cemerlang dan sangat kreatif yang menggambarkan kepakaran, bakat dan ketajaman fikiran yang luar biasa pereka bentuknya. DefeXtiles Teknik Fabrikasi Tekstil diharapkan menjadi karya yang menakjubkan, contoh teladan, sangat profesional dan sangat inovatif. Reka bentuk pemenang A' Design Award Perak ini ialah ciptaan yang sangat ketara dan dikagumi yang memberi manfaat kepada dan memajukan batas seni, sains, reka bentuk dan teknologi. DefeXtiles Teknik Fabrikasi Tekstil ialah ciptaan yang sangat dicemburui yang membangkitkan keinginan, membawa perasaan positif dan mencetuskan rasa hairan serta kagum.
Press Kit
- Unique Properties
- DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
- Tags
- textile, 3d print, lace, advanced manufacturing, fabric
- Production Technology
- In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
- Design Challenge
- To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
- Research
- We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
- Inspiration
- For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
- Project Duration
- Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
- Operation Flow
- This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
