Spark Gitar Elektrik Kembara by Maxwell Brazo

Spark Gitar Elektrik Kembara by Maxwell Brazo is a highly esteemed winner of the very prestigious 2022 A' Design Award Gangsa in Reka Bentuk Alat Muzik Competition Category.

GangsaAlat Muzik· 2022

Spark Gitar Elektrik Kembara

by Maxwell Brazo

Client: Maxwell Brazo

A' Design Award Gangsa Winner in Alat Muzik Category

39,434

Verified Award Winner

Verify Award Status for #126635

Visit Site View at A' Design Award Press Release Award Badge

Colors

The Design

About Spark Gitar Elektrik Kembara

Spark ialah gitar elektrik kembara yang direka untuk mudah dibawa dan untuk pengeluaran di rumah. Badan, leher, dan papan fret dicetak menggunakan teknik fabrikasi filamen lebur (fused filament fabrication) dengan gentian kayu kitar semula dan komposit aramid sebagai ganti kayu keras. Komponen elektrik dan mekanikal yang digunakan senang diperoleh, dan pemasangannya menggunakan sistem pendawaian tanpa pateri. Spark disiapkan menggunakan kaedah tradisional, termasuk pengamplasan, pemasangan fret, dan penyaduran varnis nitroselulosa. Jambatan tetap tanpa kepala (headless fixed bridge) mengekalkan panjang skala penuh dalam bentuk yang padat.

The Recognition

About the A' Design Award Gangsa

Spark Gitar Elektrik Kembara ialah pemenang A' Design Award Gangsa, pengiktirafan yang amat berprestij yang dianugerahkan kepada reka bentuk cemerlang yang dicirikan oleh kreativiti, kecerdikan dan ketajaman fikiran. Pemenang Gangsa ialah artifak yang amat mahir dan sangat kreatif yang membuktikan pengalaman luas, imaginasi dan akal budi pereka bentuknya. Spark Gitar Elektrik Kembara diharapkan menjadi objek yang sangat dihargai, dikagumi dan disayangi, sangat profesional dan inovatif. Reka bentuk pemenang A' Design Award Gangsa ini merangkumi amalan terbaik dalam seni, sains, reka bentuk dan teknologi, dan cemerlang dalam perhatiannya terhadap butiran. Spark Gitar Elektrik Kembara memenuhi keperluan dengan indah, menyentuh keinginan, memikat perasaan dan menarik rasa ingin tahu.

Behind the Design

Press Kit

Credits, team members and technical details provided by the designer.

Unique Properties: Focuses on sustainability, accessibility, and adaptability through use of computer aided design software and at-home manufacturing. Fully printed guitar body, neck, and fret board using alternatives to hardwoods. Recycled plastic and wood fiber composites used are able to be fully finished and assembled using simple and standard methods. All electrical and mechanical components are domestically sourced and widely available.
Dimensions & Packaging: Product Dimensions: Width 133.35mm (5.25in) x Depth 57.15mm (2.25in) x Height 768.35mm (30.25in), Scale Length: 25.5in, Fret-Board Radius: 9.5 - Modern C Neck Profile - Single Coil & Humbucker Passive Pickups
- Body/Neck/Fretboard (Timber-fill/Nylon AF80 Aramid)
- Headless Fixed Bridge and Double-Ball End Combo Headpiece
- Angled Switch Tele Titanium Control Plate
- Neck Plate (Bolt-On Style)
- Electrosocket Jack Mount
- Low Profile Truss Rod
- Stainless-Steel Hardware and Threaded Inserts
- Solderless Wiring System
Tags: Guitar, Electric, Travel, 3D Printed, Sustainablity, Instrument, Music, Design
Production Technology: Realized through Computer-Aided Design and Fused Filament Fabrication technologies. Domestically sourced electrical and mechanical components. Finished using traditional methods (sanding, seating frets, binding, nitrocellulose lacquer finish, etc.).
Design Challenge: Bio-composite filaments used, while recyclable and or compostable, do not provide adequate structural support for full-scale stringed instruments under tension. Complications with recycled wood-fiber composite filaments required research and testing of additional materials with more effective mechanical properties. Key attributes considered were creep resistance (resistance against deformation under long-term load), tensile strength, elongation at break, density, and ease of printing.
Research: Initial research into fundamental basics and history of electric guitar construction was crucial to ensure a playable end product. Standardized dimensions of classic high-end models helped to provide a familiar aesthetic and a framework to work within, and use of widely available and popular components to inform the overall design. Influenced by concepts such as compact modularity, right to repair, and the future of at-home manufacturing.
Inspiration: An exploration to replicate traditional luthier processes through new-age methods of small scale manufacturing and the pursuit of material alternatives for guitar-making. Informed by the idea that making a guitar should be more accessible and experiential; the vision for a transformative guitar able to be printed and assembled at home, inspired by vintage Fender, Steinberger, La Baye 2x4, and lap steel guitars.
Project Duration: The continuation of thesis work while at Rochester Institute of Technology, this project has spent some time in design and development. Prototyping done in 2021 and final working model and process book to be completed in 2022. Based out of Litchfield, Connecticut.
Operation Flow: Printable and playable, an innovative solution to cost-effectively produce and assemble your own guitar using recyclable materials, encompassed within a compact full-scale travel silhouette.
Image Credits: Image #1: Creator Maxwell Brazo, 2022.
Image #2: Creator Maxwell Brazo, 2022.
Image #3: Creator Maxwell Brazo, 2022.
Image #4: Photographer Maxwell Brazo, 2022.
Image #5: Creator Maxwell Brazo, 2022.