Langkau ke kandungan
Wedge House Kediaman oleh Kiyoshi Sugimoto

Reka bentuk Wedge House Kediaman oleh Kiyoshi Sugimoto ialah pemenang yang sangat dihormati bagi 2025 A' Design Award Gangsa yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Seni Bina, Bangunan dan Struktur.


GangsaSeni Bina· 2025

Wedge House Kediaman

oleh Kiyoshi Sugimoto

Klien: Masato Ikuta

Pemenang A' Design Award Gangsa dalam Kategori Seni Bina

13,244

Pemenang Anugerah Yang Disahkan

Sahkan Status Anugerah untuk #162815

Warna

Reka Bentuk

Mengenai Wedge House Kediaman

Rumah Wedge ialah kediaman tiga tingkat yang dibina di atas tapak sempit dengan cerun yang tinggi di Bandar Ikeda, Jepun. Keratan rentas berbentuk baji meletakkan tingkat terbesar di bahagian atas dan tingkat terkecil di bawah tanah, supaya tidak ada daya tambahan yang dikenakan ke atas dinding penahan lama. Dua tingkat atas dibina daripada kayu manakala tingkat bawah tanah dibina daripada konkrit bertetulang. Dinding timur dan barat disiapkan dengan plat keluli bersalut perak yang menyokong lantai julang (cantilever) dan membentuk bingkai pemandangan ke arah selatan. Ruang tamu di tingkat kedua terbuka ke sebuah teres dengan pemandangan yang luas.

Pengiktirafan

Mengenai A' Design Award Gangsa

Wedge House Kediaman ialah pemenang A' Design Award Gangsa, pengiktirafan yang amat berprestij yang dianugerahkan kepada reka bentuk cemerlang yang dicirikan oleh kreativiti, kecerdikan dan ketajaman fikiran. Pemenang Gangsa ialah artifak yang amat mahir dan sangat kreatif yang membuktikan pengalaman luas, imaginasi dan akal budi pereka bentuknya. Wedge House Kediaman diharapkan menjadi objek yang sangat dihargai, dikagumi dan disayangi, sangat profesional dan inovatif. Reka bentuk pemenang A' Design Award Gangsa ini merangkumi amalan terbaik dalam seni, sains, reka bentuk dan teknologi, dan cemerlang dalam perhatiannya terhadap butiran. Wedge House Kediaman memenuhi keperluan dengan indah, menyentuh keinginan, memikat perasaan dan menarik rasa ingin tahu.

Di Sebalik Reka Bentuk

Kit Akhbar

Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.

Ciri-Ciri Unik
The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
Dimensi & Pembungkusan
Total floor area 111.16㎡ Width 5560mm x Depth 11000mm x Height 10190mm
Tag
Slopingland structure protruding structure wedge Basement mountainside
Teknologi Pengeluaran
The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
Cabaran Reka Bentuk
Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
Penyelidikan
Research on stable structures with protruding shapes in wooden buildings
Inspirasi
The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
Tempoh Projek
Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
Aliran Operasi
A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
Paten
Copyright 2024 Kiyoshi Sugimoto.
Ahli Pasukan
KIYOSHI SUGIMOTO
Kredit Imej
All photos and videos Hirofumi Imanishi

Ditaja

Terokai Melangkaui Designers.org

Temui produk, perkhidmatan dan peluang daripada rakan pengiklanan kami.

Reka Bentuk Yang Baik Layak Mendapat Pengiktirafan Hebat

A' Design Award ialah anugerah antarabangsa yang dijuri untuk reka bentuk yang baik. Sertai A' Design Award untuk mendapat peluang memperoleh pengiktirafan berdasarkan merit, meraih kemasyhuran, prestij dan publisiti untuk karya anda. Calonkan karya anda untuk A' Design Award dan bersaing untuk Hadiah A' Design Prize yang diidamkan.

Calonkan