DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet minn Jack Forman

Id-disinn DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet minn Jack Forman huwa rebbieħ stmat ħafna tal-prestiġjuż 2021 Premju A' Design Award tal-Fidda fil-Kategorija tal-Kompetizzjoni ta' Disinn tat-Tessuti, Drappijiet, Tessturi, Mudelli u Ħwejjeġ.

FiddaTessut· 2021

DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet

minn Jack Forman

Klijent: Tangible Media Group, Mit Media Lab

Rebbieħ tal-Premju A' Design Award tal-Fidda fil-Kategorija ta' Tessut

54,895

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #109724

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet

DefeXtiles hija teknika ta' fabbrikazzjoni ta' drappijiet li tipproduċi drappijiet irqaq u flessibbli fuq printers 3D standard. Il-metodu jikkontrolla l-under-extrusion b'mod li jiffurmaw gerbub żgħir b'fibri fini bejniethom. Il-vojti perjodiċi li jirriżultaw jagħtu dehra minsuġa, arjożità, flessibbiltà u tiġbid, anke b'materjali riġidi bħall-aċtu polilattiku. Id-drapp jiġi stampat perpendikolari għal-lażġa tal-istampar, u għalhekk jistgħu jsiru forom bi tqattigħ, mgħawġa u kumplessi. L-applikazzjonijiet jinkludu ħwejjeġ, interfaċċi tanġibbli u ġugarelli.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Fidda

DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet huwa rebbieħ tal-Premju A' Design Award tal-Fidda, rikonoxximent prestiġjuż straordinarjament mogħti lil disinji tal-ogħla livell, sbieħ u impressjonanti. Ir-rebbieħa tal-Fidda huma xogħlijiet brillanti ħafna u kreattivi ħafna li juru l-għarfien espert, it-talent u l-aċċuratezza tad-disinjaturi tagħhom. Huwa mistenni li DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet ikun xogħol mill-isbaħ, eżemplari, professjonali ħafna u innovattiv bil-fond. Dan id-disinn rebbieħ tal-Fidda huwa invenzjoni notevoli u mammirata li tikkontribwixxi biex jitwessgħu l-fruntieri tal-arti, ix-xjenza, id-disinn u t-teknoloġija. DefeXtiles Teknika ta' Fabbrikazzjoni ta' Drappijiet huwa ħolqien li ħafna jinvidjawh, li jqajjem ix-xewqat, iġib sentimenti pożittivi u joħloq tgħaġġib u mistagħġib.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Tikketti: textile, 3d print, lace, advanced manufacturing, fabric
Teknoloġija tal-Produzzjoni: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Sfida tad-Disinn: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Riċerka: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Ispirazzjoni: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Tul tal-Proġett: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Fluss tal-Operazzjoni: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Membri tat-Tim: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii