Id-disinn Bend Mejda Tal-Kafè minn Jan Goderis huwa rebbieħ stmat ħafna tal-prestiġjuż 2023 Premju A' Design Award tal-Bronż fil-Kategorija tal-Kompetizzjoni ta' Disinn tal-Għamara.

BronżGħamara· 2023

Bend Mejda Tal-Kafè

minn Jan Goderis

Rebbieħ tal-Premju A' Design Award tal-Bronż fil-Kategorija ta' Għamara

15,033

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #148865

Żur is-Sit Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Bend Mejda Tal-Kafè

Il-mejda hija magħmula minn żewġ pjanċi tal-aluminju mgħawweġ li jaqblu flimkien. Meta jitqiegħdu flimkien, il-pjanċi jestendu kollha sas-saqajn. Dan jagħti ċerta trasparenza u ħeffa lid-disinn u jinħoloq ħażna vertikali għal rivisti, gazzetti u plaid. Bejn iż-żewġ pjanċi ta 'fuq, hemm ukoll il-possibbiltà ta' ħażna fuq iż-żewġ naħat tal-mejda.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Bronż

Bend Mejda Tal-Kafè huwa rebbieħ tal-Premju A' Design Award tal-Bronż, rikonoxximent prestiġjuż ħafna mogħti lil disinji eċċellenti ddistingwuti mill-kreattività, l-ingenwità u l-għaqal. Ir-rebbieħa tal-Bronż huma xogħlijiet bi ħila biżżejjed u kreattivi b'mod impressjonanti li jawtentikaw l-esperjenza vasta, l-immaġinazzjoni u l-ħila ta' riżorsi tad-disinjaturi tagħhom. Huwa mistenni li Bend Mejda Tal-Kafè ikun oġġett imqabbar ħafna, mammirat u maħbub, notevolment professjonali u innovattiv. Dan id-disinn rebbieħ tal-Bronż jinkorporaw l-aħjar prattiki fl-arti, ix-xjenza, id-disinn u t-teknoloġija u huwa eċċellenti fl-attenzjoni għad-dettalji. Bend Mejda Tal-Kafè jissodisfa l-ħtiġijiet b'mod eċċellenti, imiss ix-xewqat, jinċanta s-sentimenti u jattira l-kurżità.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
Dimensjonijiet u Ippakkjar: Dimensions: 125 x 55 x 28 cm
Tikketti: coffee table, folded table, ecological design, functional design, minimal design
Teknoloġija tal-Produzzjoni: Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
Sfida tad-Disinn: The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
Riċerka: The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
Ispirazzjoni: The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
Tul tal-Proġett: The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
Fluss tal-Operazzjoni: The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
Privattivi: e-depot: 000595853
Membri tat-Tim: Jan Goderis
Krediti tal-Immaġni: #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022