Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx minn Leijing Zhou

Id-disinn Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx minn Leijing Zhou huwa rebbieħ stmat ħafna tal-prestiġjuż 2026 Premju A' Design Award tal-Bronż fil-Kategorija tal-Kompetizzjoni ta' Disinn ta' Materjali tal-Bini u Komponenti tal-Kostruzzjoni.

BronżKomponenti tal-Bini· 2026

Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx

minn Leijing Zhou

Klijent: Zhejiang University

Rebbieħ tal-Premju A' Design Award tal-Bronż fil-Kategorija ta' Komponenti tal-Bini

24,242

Rebbieħ ta' Premju Ivverifikat

Ivverifika l-Istatus tal-Premju għal #181573

Ara fuq A' Design Award Stqarrija għall-Istampa Badge tal-Premju

Kuluri

Id-Disinn

Dwar Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx

LightLeaf hija sistema ta' lovers li tidderieġi d-dawl tax-xemx għal djar b'dawl naturali limitat. Ix-xafri konvenzjonali tal-persjani huma sostitwiti bi xfafar aġġustabbli li jiggwidaw id-dawl, li jaqbdu d-dawl ambjentali tal-jum u jirriflettuh aktar fil-fond fil-kamra. Ix-xfafar jgħaqqdu wiċċ ta' fuq b'riflettanza għolja ma' finitura ta' taħt diffużiva biex jikkontrollaw id-dija. Qafas ħafif tal-aluminju b'ċappetti pivotanti u serraturi tal-pożizzjoni jippermetti li l-unità tiġi mbuttata 'l barra meta jkun meħtieġ aktar dawl naturali. Is-sistema tappoġġja fabbrikazzjoni modulari u installazzjoni mhux invażiva fuq gwarniċi tat-twieqi eżistenti.

Ir-Rikonoxximent

Dwar il-Premju A' Design Award tal-Bronż

Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx huwa rebbieħ tal-Premju A' Design Award tal-Bronż, rikonoxximent prestiġjuż ħafna mogħti lil disinji eċċellenti ddistingwuti mill-kreattività, l-ingenwità u l-għaqal. Ir-rebbieħa tal-Bronż huma xogħlijiet bi ħila biżżejjed u kreattivi b'mod impressjonanti li jawtentikaw l-esperjenza vasta, l-immaġinazzjoni u l-ħila ta' riżorsi tad-disinjaturi tagħhom. Huwa mistenni li Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx ikun oġġett imqabbar ħafna, mammirat u maħbub, notevolment professjonali u innovattiv. Dan id-disinn rebbieħ tal-Bronż jinkorporaw l-aħjar prattiki fl-arti, ix-xjenza, id-disinn u t-teknoloġija u huwa eċċellenti fl-attenzjoni għad-dettalji. Light Leaf Lover li Jidderieġi d-Dawl tax-Xemx jissodisfa l-ħtiġijiet b'mod eċċellenti, imiss ix-xewqat, jinċanta s-sentimenti u jattira l-kurżità.

Wara d-Disinn

Kit għall-Istampa

Krediti, membri tat-tim u dettalji tekniċi pprovduti mid-disinjatur.

Proprjetajiet Uniċi: LightLeaf is a daylight-redirecting louver system for living spaces with insufficient natural light. By replacing conventional blind slats with adjustable light-guiding blades, it captures ambient daylight and redirects it deeper indoors, creating soft, even illumination without daytime electricity. Designed for low-floor, north-facing, or compact residences, LightLeaf improves visual comfort and spatial quality while balancing privacy, safety, and energy efficiency.
Dimensjonijiet u Ippakkjar: 900mm x 80mm x 1350mm
Tikketti: Daylight redirecting system, Light-guiding louvers, Passive daylighting, Energy-efficient housing, Urban living solutions, Non-invasive installation, Sustainable architecture, Indoor environmental quality
Teknoloġija tal-Produzzjoni: LightLeaf integrates a lightweight aluminum frame with pivot hinges, position locks, and adjustable louver assemblies. The dual-surface louvers combine a high-reflectance upper coating with a diffusive lower finish to enable controlled daylight redirection. The system is engineered for modular fabrication and non-invasive installation on existing window frames. Its design development referenced passive daylighting principles, facade engineering strategies, and basic optical reflection modeling to optimize light distribution efficiency and glare control.
Sfida tad-Disinn: The main challenge was converting a conventional shading device into an effective daylighting system without adding complexity. It required balancing light redirection, glare control, privacy, and structural stability within existing window constraints. Building regulations and wind resistance were key external factors. The solution focused on simplifying the mechanism while maintaining performance and safety.
Riċerka: This project is based on applied design research addressing insufficient daylight in residential spaces. The goal was to redesign a familiar window element to improve indoor light quality without electricity. Field observations of low-floor and north-facing homes were combined with simple daylight behavior studies and visual simulations. Results showed that redirecting light upward reduces glare and increases brightness deeper inside, improving comfort and energy efficiency through minimal structural intervention.
Ispirazzjoni: This project was inspired by the widespread issue of underlit living spaces, especially low-floor, north-facing, or obstructed residences. Observations of residents relying on temporary reflective panels and daytime artificial lighting revealed the need for a more effective and integrated solution. Drawing from passive daylighting principles, LightLeaf reimagines conventional blinds as a light-guiding system to improve indoor environmental quality without additional energy use.
Tul tal-Proġett: The project commenced in October 2025 and was completed in January 2026.
Fluss tal-Operazzjoni: LightLeaf functions like a regular blind in daily use, allowing users to adjust the slats for shading and privacy. When more daylight is needed, the lock is released and the unit is gently pushed outward. By rotating the blades, incoming light is reflected upward and distributed deeper into the room. This simple transformation redirects natural light more evenly, reducing glare near the window while brightening darker areas indoors.
Membri tat-Tim: Keyin Chen
Leijing Zhou
Qikai Tang
Yi Zhou
Rui Yao
Menghan Li
Yijun Zhao
Bingjing Fang